Which is better Cerakote or DuraCoat?

Which is better Cerakote or DuraCoat?

Cured Cerakote absolutely beats cured DuraCoat in every measurable respect with regard to finish quality, abrasion resistance, and overall toughness.

What is Cerakote paint?

Cerakote is a specialized coating that can be applied to wood, polymers, metals, and plastics that is composed of a polymer-ceramic compound. The ceramic coating benefits the firearm by providing and enhancing physical components including: Improving the wear and tear over time.

Can you spray Cerakote?

Cerakote should be applied using an HVLP Spray Gun with a 0.8mm tip. NIC uses, and highly recommends the Iwata LPH-80 spray gun to apply Cerakote products.

Is Cerakote hard to apply?

APPLICATION. The steps are relatively simple: disassembly, sandblasting, cleaning, painting, and baking. But, of course, simple doesn’t mean easy. Cerakote is ridiculously thin

What is the most durable gun finish?

Cerakote Pros: Probably the most rugged finish available for your firearm. Impervious to solvents, cleaners.

How long will DuraCoat last?

12-18 months

What’s better than Cerakote?

GunKote is the biggest competition for Cerakote; each have their own following for being the best firearm coating, and both are comparable when tested against corrosion, chemicals, and durability. KG Gunkote also has two series, the 2400 Series (Oven Cure), and the 1200 Air Cure Series.

Is DuraCoat permanent?

DuraCoat is permanent. With normal use, a firearm finished with DuraCoat will last several lifetimes.

Does Cerakote scratch easily?

Hardness: Test reports have rated cerakote coatings with a pencil hardness of 9H. Other than hardness, there is a scratch resistance rating of 6H. Cerakote ensures that you don’t end up spoiling your firearm because of any scratches or nails.

How long does Cerakote coating last?

Longevity: 5+ Years. Sometimes when the two are visually compared side by side in the same camouflage pattern, there may be a difference in color saturation. With cerakote, color is applied directly to the surface of the gun, which may slightly alter the tone depending on the color of the surface prior to application.

Is Cerakote removable?

Cerakote is indeed removable through media blasting. It is NOT permanent.

What do you spray Cerakote with?

Cerakote should be applied using an HVLP Spray Gun with a 0.8mm tip. NIC uses, and highly recommends the Iwata LPH-80 spray gun to apply Cerakote products.

Can Cerakote be applied with an airbrush?

This airbrush can achieve fine details even with thicker products such as DuraCoat and Cerakote. If you are painting detailed projects, the Iwata Eclipse HP CS is the airbrush to get.

What psi do you spray Cerakote?

20 to 25 psi

How cold can you spray Cerakote?

Avoid spraying in extreme conditions (Ideal spraying conditions are between 60xb0-80xb0F (15xb0-26) and x26lt;70% humidity.). Dispose of any unused catalyzed Cerakote and clean all parts of your spray gun. If you are unsure as to the temperature stability of your parts, contact the manufacturer prior to curing.

Does Cerakote scratch easy?

Hardness: Test reports have rated cerakote coatings with a pencil hardness of 9H. Other than hardness, there is a scratch resistance rating of 6H. Cerakote ensures that you don’t end up spoiling your firearm because of any scratches or nails.

How does Cerakote get applied?

Anyone can buy Cerakote, but the parent company NIC Industries, Inc., did not design it to be a do it yourself coating process. That’s because they believe that the mark of a top-quality application is relevant to the ability, skill, and experience of the professional doing the coating work.

Can anyone Cerakote?

Recommended Cure Temperatures Cerakote can be cured at the maximum Recommended Cure Temperature listed in the All in one TDS, based on color and substrate. Standardized curing temperature for H-Series is done at 250xb0F for 2 hours following a 15 minute ambient flash time.

What is the best coating for firearms?

The black oxide finishing treatment is a high-quality, corrosion-resistant finish that won’t chip, peel or change the physical dimension of a firearm piece. As one of the least expensive corrosion-resistant finishes on the market, black oxide is often the preferred finish used on gun barrels and small components.

What is better than Cerakote?

GunKote is the biggest competition for Cerakote; each have their own following for being the best firearm coating, and both are comparable when tested against corrosion, chemicals, and durability. KG Gunkote also has two series, the 2400 Series (Oven Cure), and the 1200 Air Cure Series.

Which is more durable Cerakote or DuraCoat?

Cured Cerakote absolutely beats cured DuraCoat in every measurable respect with regard to finish quality, abrasion resistance, and overall toughness.

How durable is a Cerakote finish?

Cerakote is more durable than any other aftermarket sprayed on finish. There are many types of finishes, sprayed, chemical, plated to name a few. Nickel, Hard Chrome are some of the most durable finishes you can use but have their limits as far as color choice!

How strong is DuraCoat?

Cured Cerakote absolutely beats cured DuraCoat in every measurable respect with regard to finish quality, abrasion resistance, and overall toughness.

What is the most durable firearm coating?

DuraCoat is a hard polymer that’s self-lubricating to certain extent; extremely hard, oil, solvent, and wear resistant. It resists 100 inch pounds of direct impact and 80 inch pounds of reverse impact. Its pencil hardness runs H to 2H. DuraCoat has passed a 300 hr.

Is DuraCoat any good?

Cerakote Pros: Probably the most rugged finish available for your firearm. Impervious to solvents, cleaners.

Leave a Comment

Your email address will not be published.