Wagner Control Pro 170 Review

Wagner Control Pro 170 Review

Are you on the verge of buying the Wagner Control Pro 170 paint sprayer, then you should probably take a break and go through our Wagner Control Pro 170 review to see if it will be right for you and worth your money?

There is no doubt that Wagner is one of the best manufacturers of industrial and power tools, but we cannot give all the product credit based on that fact, especially when we could have other alternatives.

In this article, we will give you all the details you will need to rate this paint sprayer.

Let’s get started!

Wagner Control Pro 170 Review | Overview

Wagner Control Pro 170 Review

It is a high-efficiency sprayer that uses the airless spray mechanism for a super-quality spray coat. It reduces overspray, which is the primary advantage of using it for your project.

The efficiency of this sprayer makes it one of the most sorts after choices for completing large painting projects.

Features of Wagner Control Pro 170

If you are thinking of buying this paint spray model from Wagner, the following highlighted features will help you in your decision.

Powerful spray gun

The spray gun is an essential part of any sprayer. Apart from the power of the motor or compressor, the gun determines how fast the job can be completed.

The Wagner control pro spray gun has a 0.60 horsepower HEA pump that eliminates the process of thinning. It can spray un-thinned paint with no issue. This will reduce the amount of coats needed by the surface, thus increasing work speed.

All parts of the gun are made with metal, which increases the durability and longevity. Despite this, it is lightweight. You can easily maneuver around the workpiece for a better and professional job.

With this spray gun, you can adjust the spray pattern to suit the project. Do this with precision and effortlessly.

High efficiency

The efficiency of the Wagner control pro 170 can be compared to none. Various factors contribute to this.

First is the pump power of 0.60HP. This ensures that you get quality spray with less overspray of up to 50% compared to the air sprayer counterparts.

Also, the sprayer has a maximum operating pressure of 1500 PSI, which is capable of spraying up to 300 gallons per year.

Pressure control

Apart from choosing between different nozzle spray patterns, you can also control the pressure flow rate. This helps regulate the flow of paint.

It comes with a control knob that can be easily turned while selecting the best setting. There are 5 settings to choose from.

How to set up the Wagner Control for 170 for painting

Setting up the unit

The Wagner pro 170 is easy to assemble. It comes with a manual that contains the assembling procedure. If you seem not to understand the illustrations in the manual, you can consider putting a call across to their technical support.

Start with attaching the toolbox cover at the top and then attach the handle.

Turn the unit up-side-down to access the suction and return port.

Slide the suction and return tubes to the appropriate fittings. You can easily identify them because they come in different sizes. The suction and return tubes are the short transparent ones. Then secure them in place with the clamp.

Turn back the unit to its upright position. Reach out for the long black hose and connect one of the ends to the fluid outlet of the Wagner unit. It is a threaded hose; you will need to screw it clockwise with the use of an adjustable spanner, tighten the hose to the outlet.

Spin the spray gun to the other end of the hose and tighten with an adjustable wrench.

Preparing to spray

Follow the following steps to prepare the Wagner sprayer to spray.

Depress the pusher valve located just under the unit. This will free the inlet ball.

Place the suction tube into the paint bucket you intend to spray from. Note that it depends on what kind of finish or texture you want to achieve, you may not necessarily need to thin the paint because the Wagner Control Pro 170 will spray paint of any thickness.

Turn the spray valve down to prime position and turn the pressure control knob to setting 2.

The pump starts to run; thus, forcing the paint to flow and fill the return tube.

Return the pressure control knob back to zero.

Remove the tip guard from the spray gun and point the spray gun into an empty waste bucket.

While the gun is pointed to the waste bucket, turn the pressure control knob to 2 and then turn the spray valve to spray.

Push the spray gun trigger until the paint starts to flow freely through the gun.

Attach the spray tip back to the gun as you get ready to spray.

Testing your setup

You should never spray directly on the workpiece first. You should always use a test surface such as a board to test if your settings are okay.

Adjust the pressure control to 5 and spray on your test surface to see if everything is okay. You can adjust the knob to the best setting, depending on the project you are handling.

What Can You Use The Wagner Control Pro 170 For?

Large Decks

wagner controlPro170

Whether you are renovating your deck or you are building a new one, we know the stress associated with painting decks.

The Wagner control pro is here to remove all these by giving your deck project a professional paint finish. It provides more control and a soft spray pattern for a stunning job.

Home Exteriors

Wagner Control Pro 170

Home exterior is a pretty large job. You don’t want to use an air sprayer for it. It can also take you days to complete when using brushes and rollers, especially when it requires you to perform multiple coats.

The hose gives you better coverage. You can conveniently use it for a 2 story building without thinking of extending.

Basement Renovations

We know that most painters try to avoid using paint sprayers indoors because a majority of them leaves you with a mess. This is caused by overspray, which may not be controlled.

The good news is that with this Wagner model, quickly paint a remodeled basement with less mess.

Large Outdoor Projects

ControlPro170 paint sprayer

The rate at which it takes to complete a project using the Wagner control pro is applauding.

This is why it is recommended for large projects. It reduces the time by more than half as compared to using brushes and rollers.


  • It has got a long hose that can increase your reach. The unit comes with a 30 feet hose and flexible to maneuver.
  • The Wagner control pro is easy to use. Since you are only holding a lightweight spray gun, the load is reduced.
  • It is easy to clean. All you need do is replace the paint bucket with a bucket of water and spray for about a minute, and the whole system is cleaned.
  • There is less overspray, thus saving you the money required for your project. It reduces overspray up to 50%
  • It can be used to spray a range of liquid content, including primers, and oil enamel. Not forgetting to mention that it does not require thinning.
  • Despite mentioning that it can be used to spray a range of liquid content, there is a limit to this. Unfortunately, Wagner Control Pro 170 may not be the best for spraying thick latex paint. If you have to, then it is highly recommended thinning.

Where Can You Buy Wagner Control Pro 170?

You also get to browse through previous buyer’s reviews to see what other experienced painters are saying about the sprayer.

However, do not entirely go with the ratings and comments from users because different users may have different experiences from the same product.

You can also check out some of the other Wagner products below:

Wagner Flexio 890 ReviewsWagner Flexio 590 ReviewWagner Flexio 590 Vs 570Wagner PaintEater ReviewWagner Heat Gun HT1000Wagner Flexio 3000 Vs 590Wagner Furno 300

Do you have to thin paint for a Wagner sprayer?

Do You Have to Thin Paint for a Wagner Sprayer? Yes! Actually, most beginner or hobby paint sprayers require the paint to be thinned because they don’t have enough power to suck up and push out anything thicker than stain.

Do I need to thin the paint for the Wagner Pro?

Each time your Wagner HVLP spray gun clogs it will take you 10-15 frustrating minutes to clean it out. So, do yourself a favor and thin your latex paints right the first time. On the flip side, be careful not to over-thin your latex paint.

Why is my Wagner paint sprayer spitting paint?

Spray guns spit when air is being introduced into the fluid outside of at the air cap. Fluid Nozzle – The first area to check if your spray gun is spitting is the fluid nozzle. A loose fluid nozzle does not properly seat in the tip of the spray gun and causes air to enter the fluid supply resulting in spitting.

How do you thin exterior paint for a sprayer?

Here’s what you do:

  • Pour the paint into the bucket.
  • Add ½ cup (118 milliliters) of water for every gallon of paint.
  • Mix thoroughly.
  • Check the thickness by running the paint through a funnel. If it flows freely through the funnel, you know the paint is thinned enough.

How long can I leave paint in my Wagner sprayer?

Short 3 days – 3 months

This is probably the most common storage method for most airless paint sprayers. Most painting professionals and contractors fall into this time span. Fresh, clean mineral spirits is considered a storage fluid for this time span, use it or another pump preserver such as Graco Pump Armor.

How do you thin oil based paint for spraying?

Steps for Thinning Oil Based Paint for Your Sprayer

  • Pour the paint through a strainer into a clean container.
  • Add 1 part mineral spirits or turpentine for every 3 parts paint.
  • Stir paint with a clean stir stick until the thinner and the paint are fully mixed.
  • Run the thinned paint through a funnel.

Can you use gloss paint in a Wagner Spray Gun?

Wagner’s “Perfect Spraying Attachment” is a great choice for spraying. The product is available in plastic or metal cups and can be used for spraying gloss, lacquers, varnishes, satin, eggshell, stains, wood preservatives, etc. Wagner’s “Perfect Spraying Attachment” is a great choice for spraying.

What do you thin acrylic paint with?

There are two choices for thinning acrylic paint: water or acrylic medium. Water breaks down the binder in acrylic, thinning the paint so that it looks like watercolor and allows it to sink into the surface, resulting in a matte finish.

Can you use chalk paint in a Wagner sprayer?

Set up the Wagner Spray Tent in your space for easy clean up. Chalk paint provides a flat and durable finish for any surface including fabric and cement. Stir the paint well and then simply pour into the sprayer.

Why is my paint sprayer not smooth?

Sometimes, the paint can get clogged in the nozzle which will make the paint spit out. This will not give you a smooth texture and you’ll have to sand it off later. If the paint does spit, you’ll most likely need to clean the nozzle or switch it out with another nozzle if you have one lying around.


We have taken out time to give you the Wagner control pro 170 reviews, and if you patiently go through all the details put up here, you should be able to decide for yourself if it is for you.

We love it just the way it is. All features are amazing. More importantly, we love the speed. Typically, you can paint a door using rollers and brushes in 30 minutes. But with this sprayer, it only takes 2 minutes for the same job.

Whether you are a professional or beginner in painting, this unit will be useful. For a few bucks under 400, you can be the proud owner of this excellent machine.