How To Remove Paint From Metal With Baking Soda

How To Remove Paint From Metal With Baking Soda

If you’re searching for a method that enables you to strip paint off metal without exposing you to hazardous chemicals, you’ve just found it.

I’m going to give you a simple step-by-step guide on how to remove paint from metal with baking soda –just ordinary-everyday baking soda.

It’s a home remedy that is so easy even a 9-year old could do it – as you’ll soon see yourself. Funny enough, you don’t need high-end equipment or any prior knowledge of painting.

Why Use Baking Soda to Strip Paint Off Metal?

Removing metal Paint With Baking Soda

Well, there are tons of ways to remove paint from metal. But apart from removing metal paint with Vinegar, no other method is as safe and as pocket-friendly as baking soda.

Here are some well-known facts:

1. You can start right off the bat

Learning how to remove paint from metal with baking soda is the fastest way out there – at least for DIY homeowners who want to start ASAP.

This method skips all the red tapes (adherence to official rules) when stripping paint, and plugs you directly to the task.

You don’t need to prep the work area like covering the ground with drop cloths as surface protection against the stripper, or neither do you have to wear protective gear like gloves and goggles.

You can start right away without those things because you don’t necessarily need them.

2. A penny saved is a penny earned

Almost every kitchen has baking sodas. Even if you don’t, you can get them from a nearby grocery store only for a few dollars.

They are inexpensive compared to chemical strippers or affording a steamer unit.

Rather than opting for pricey chemicals only to strip those hinges or other small hardware you’ve covered by mistake, you can put some money behind if you reach out for a baking soda.

With just the right quantity of baking soda and water, you can erase any type of paint from the metal, without bringing harm to the material in question.

3. It’s Eco-friendly

If baking soda can be eaten, then it’s 100% safe for use.

And, there is nothing more refreshing than using it as a paint stripper because you can safely remove paint without introducing harsh chemicals or unpleasant fumes into your home.

Everyone in the world is familiar with baking soda. And it’s easy to leverage as it is an evergreen stripper that can be used anytime and anywhere.

Anyone can do this folks. It doesn’t matter if it’s your first time; we will hold you by the hand through the entire process. It’s that kind of practice-makes-perfect strategy.

Mind you, it’s efficient for use on small metal hardware like doorknobs, hinges, and more – it doesn’t remove paint on non-metal surfaces.

That said, below are a few tools you will need for the job:

  • Big bowl
  • Clean Water
  • And baking soda (in large quantity)
  • Scrubbing brush
  • Dry rag
  • Drop cloths (optional)

So without further ado, here’s how to remove paint from metal with baking soda:

Read Also: How to Remove Paints From Car

Click HERE to buy Baking Soda for paint removal:

How to Remove Paint From Metal With Baking Soda

How To Remove Paint From Metal With Baking Soda

Having discussed why you should use baking soda to remove paints from metal, let’s now look at how to remove paints from metal with baking soda. It’s worth mentioning that removing paint from hinges with baking soda is also possible.

Step 1: Get a large pot

Get a pot large enough to contain the metal, then fill it with one-quarter of water.

We recommend using a condemn pot that you no longer use to prepare meals. But it must be intact – there shouldn’t be any leakage or whatsoever.

Step 2: Get the right baking soda paint remover

[amazon box=”B00LO1XXQW”]

You can easily buy a baking soda paint remover from any glossary store or simply click here to buy one from Amazon. Once that is done, add a ¼ cup of baking soda to the water inside the pot. Please do not stir!

Allow the solution to settle down at the bottom (all by itself), before placing the pot on the stove.

Step 3: Place the pot on a stove

Turn on the stove. The water should be just below the boiling point while bubbling gently.

While waiting for the mixture to simmer, you should be setting up an area around the kitchen where you can let the metal piece dry by laying it down on the dry cloth.

Step 4: Dip the metal into the water

Dip the metal piece into the simmering water with the use of tongs.

Ensure the hardware isn’t touching each other (if you have more than one) or robbing itself against the sides of the pot.

Step 5: Allow it sometime to boil

Let it boil for 15-20 minutes – allowing the paint to bubble and fall off.

The paint won’t come off all at once. But it works beautifully well because the metal and paint expand at different temperatures, breaking the bond between them.

Remove the metal piece from the water using the tongs. Drop it on the prepped area. And let it cool off.

After that, you need to scrub the metal lightly with a scrubbing brush, removing any traces of paint or soda residues. Then wipe it down with a fresh, dry rag.

Frequently Asked Question

What are other natural ways to remove paint metals?

Another safe stripper used to remove paint from metals is the Vinegar. They are an easy, inexpensive, and effective way to remove stubborn paint from hardware surfaces without exposing yourself to toxic fumes.

We have compiled a simple DIY vinegar paint remover recipe for you, so go check it out.

Can I use regular baking soda as I see in the grocery store?

Yes, regular baking soda will work well, that is if you’re using the boiling method. As for soda blasting: NO!

All baking sodas are chemically the same (NAHCO3), and not all will work for blasting. However, ARMEX can. And only ARMEX from the manufacturer ARM & HAMMER™.

It is because ARMEX contains ingredients for flowability, rinsability, along with uniform particle sizes from 70-270 microns.

These features enable you to get a more aggressive removal application.

Is soda blasting dangerous?

No! Soda blasting is the use of sodium bicarbonate A.K.A baking soda. And it has a reputation for safe use among humans and animals.

Even the soda dust (from the blasting) is a mild irritant when it gets into one’s eyes or breathed into the lungs.

It poses no health risk compared to the contact with chemicals and many other harder abrasives (like sand) used in blasting operations.

What’s the difference between sandblasting and soda blasting?

The difference is clear. Sandblasting uses sand particles jetted by compressed air. Whereas, soda blasting uses sodium bicarbonate, otherwise known as baking soda.

Read Also: Does Vinegar Remove Paint From Concrete?

Does baking soda take off paint?

The baking soda method has proven to be a very effective and simple way to remove paint from different materials but especially metals. By mixing boiling water with baking soda and applying it to the affected areas, after about 30 minutes or so, you will be able to peel away any unwanted paint easily.

What is the fastest way to remove paint from metal?

In fact, an incredibly effective paint remover for metal is boiling water. This technique is best for removing old paint from items like hardware, hinges, knobs, etc, and is likely the fastest, easiest, and cheapest option if done correctly.

Will vinegar and baking soda remove paint?

How to Make Paint Remover for Metal. Removing paint from metal without using chemicals is super simple. Using vinegar, baking soda and hot water, or soaking it in hot soapy water should do the trick.

How do you get paint off of metal?

Use an old pan and add water. For every litre of water, add about 60ml of vinegar or baking soda. Put the item you want to strip in the pan and boil for about 15 minutes or until the paint falls off. Wear heat protective gloves and use tongs to remove the metal.

What is the best paint remover for metal?

Top 8 Metal Paint Strippers

  • Klean-Strip Quart Easy Liquid Sander And Deglosser.
  • 3M Heavy Duty Stripping Pads.
  • Paint Stripper Super Remover New Generation.
  • Dumond SmartStrip Advanced Paint Remover.
  • Sunnyside 2-Minute Advanced Paint Remover.
  • 3M Paint And Rust Stripper.
  • Bates Paint Scraper 5-in-1 Tool.

Can vinegar remove paint from metal?

Vinegar is an excellent solution if you want to remove paint from metal objects. Let the paint soften for 10-15 minutes, then scrape it off with a paint scraper. Vinegar is a cost-effective, natural alternative to commercially available paint strippers, that contain toxic chemicals and give off harsh fumes.

How do you strip paint with baking soda?


  • Fill an old pot with water and bring it to a simmer.
  • Add a generous amount of baking soda to the simmering water.
  • Drop the hardware into the pot and let it simmer for fifteen or so minutes.
  • Pull the hardware out of the pot and place it somewhere where the paint can be scraped off.
  • Peel and scrape the paint off.

What is a good homemade paint remover?

Pour 2 cups room temperature water into a dish and add 1 cup borax, 1 cup ammonia and 1 cup washing soda (found with laundry detergents in any supermarket). Mix thoroughly until you have a consistent creamy paste, then brush over the paint with this mixture.

Does vinegar remove paint?

Yes, vinegar dissolves both water-based paint and oil-based paint from wooden and metal surfaces. It’s a natural paint remover, making it one of the best ways to remove paint.

What is the best grit sandpaper for removing paint from metal?

Attach an 80-grit sanding disk to your sander and begin sanding the metal surface from which you need to remove paint. Because 80 grit is pretty coarse, stop using it when the paint is almost all the way off.

Conclusion | Baking Soda And Vinegar Paint Remover

As you can see, using baking soda to remove paint from metal is an effortless and painless process.

If you’ve wanted to learn how to remove paint from metal with baking soda, hopefully, this guide has provided you with everything you need to know from scratch to finish.

And if you’re able to follow this guide (one step at a time), you won’t encounter any obstacles.

But, I must warn you, this method is only suitable for small metals. It won’t work on large hardware like doors because your pot isn’t big enough to cook it. You can follow this guide to learn how to remove paint from metal doors.

Related Posts: