Painting Techniques For Uneven Walls

Top 7 Painting Techniques For Uneven Walls

Uneven walls, due to cracks and holes, are eyesores that must be fixed, especially if you want to improve your home’s appearance. Keep in mind, however, that a simple painting technique does not make the imperfections less visible.

The fact is, when the wrong type of painting technique is used, these flaws become more noticeable. So, before using any painting techniques for uneven walls, you must learn about strategies used by professionals to fix this problem.

Let’s take it a bit further to, first of all, show you the strategies used by professionals, which will give you more insight on how to do it yourself.

How to Fix Uneven Wall Like a Pro

how to fix uneven wall

Although uneven walls are used in most modern home construction due to its relatively low price, it is not always forgiving. If an uneven wall is not adequately finished when installed, seams and ridges may be evident under the final paint job.

Painting techniques that are not proper can lead to unsightly runs, drips, and lap lines. Also, the scrapes and bumps of everyday life can cause small holes in the drywall. If your painted uneven wall has visible imperfections, you have a few options.

Patching holes and other flaws on walls is essential to ensure a clean surface, especially if you’re going to use paints with a semi-gloss or shinier finish. You can fix or remove these flaws using a joint or spackle compound.

A spackle, available in powder form and ready-made paste, is typically used to fix small holes and cracks. Meanwhile, a joint compound, also referred to as drywall mud, is utilized to pad large holes, covering joints between panels.

In terms of using spackle, after sanding the area to get rid of fragments and scraping off loose paint, scoop sufficient spackle to fill the crack or hole. Spread the compound over the hole or break until it’s wholly filled.

It’s worth noting that spackle tends to shrink once it dries out; therefore, you may be required to reapply a little amount of spackle. Repeat the process until you achieve an even wall surface. And if you applied too much spackle, leading to a small lump, sand the patch thoroughly until it becomes as flat as the surrounding surface.

In terms of the joint compound, the process usually begins with using a self-adhesive mesh patch to cover the hole on the wall. The compound is applied to the mesh to conceal it. You may apply a second coat of joint compound if necessary. Then, the patch is sanded to make it smooth and flat.

Another way to address uneven walls by professionals is to use decorative painting techniques like textured painting and faux painting techniques.

Using these approaches is like hitting two birds with one stone as you not only cover surface flaws but also give your walls a decorative look. Plus, you also don’t have to spend a lot!

Also, the textured paint method can be adopted. In textured painting, the outcome or look depends on your chosen paint texture, technique, design, and tools. As you can use just about any tool, from sponges to your fingers, the patterns or methods you can create are countless.

Meanwhile, faux painting, also called faux finishing, can also be used as a painting technique for uneven walls; it refers to a decorative paint finish that imitates the look or appearance of another material.

Using this technique, scratches and dents on your walls may be incorporated into the design, giving the wall an antique or a distressed appearance. The most straightforward faux finishing technique is sponging.

Other tools used include putty knives, rags, and trowels. For excellent results, pick a base and glaze coat shades of different tones but from the same color family.

Installing new drywall is the most straightforward solution to uneven walls. However, apart from being costly, it’s also time-consuming.

Also, this option should only be considered when no patching or skim coating could restore the walls because they are badly battered or have holes more significant than 6″x 6″.

Patched or repaired drywalls or walls in older homes usually have scars, which you can hide by adding a faux Tuscan paint finish or textured paint. Any other method can involve adding a secondary glaze coat by color washing, dry brushing, ragging, and more.

Each of these methods introduces at least two colors to the walls to make them appear textured and suede-like or give them an Old-World look – while hiding the wall’s defects.

Wall painting techniques used for decorative purposes can turn a wall’s imperfections into benefits by producing an antique and distressed or shabby chic-style look.

Now let’s get to know the simple steps to paint an uneven wall; let’s go!

Read Also: How To Soften Hardened Paint

Painting Techniques For Uneven Walls

Painting Techniques For Uneven Walls

1. Wall Prep

Make needed repairs on the uneven wall and sand once the repairs have dried. Then use a moistened cloth to wipe down the walls to eliminate uneven wall dust and any other debris.

In order to hide large flaws, you may want to add a texture coat of uneven wall mud to the wall to create a more dramatic effect, but you can also perfect the textured look using faux painting techniques.

Use painter’s tape to cover baseboards or remove them altogether, and lay drop cloths to catch paint spills.

2. Spot Repairs

When damage is not much, and the rest of the paint is in perfect shape, spot repairs are the least expensive and most comfortable choice. Use spackle or joint compound and a putty knife to fill in small holes or cracks.

Let the product set according to the manufacturer’s instructions, and then sand it smooth using a block sander and fine-grit sandpaper. When there are ridges or seams beneath the paint, you can use a palm sander to sand them down.

Start with medium-grit sandpaper and work your way progressively down to fine grit. Cover or make away with valuable items and wear a dust mask, as the cloud of dust can be intense. Use primer on the repaired area with latex primer and allow it to dry for at least four hours.

Using a paintbrush, apply two thin coats of the original paint color to the fixed surface, overlapping the existing paint slightly in order to prevent lap lines. Make sure to let each coat dry for at least 24 hours.

Note: Never sand lead-based paint. If you notice your older home may contain lead-based paint, have a sample tested before sanding any painted surfaces

3. Ragged Walls

Hide uneven wall imperfections and flaws by using the paint ragging technique. After making some repairs, add a primer coat to the wall with a roller.

When the wall has dried up, apply a base coat of sky-blue color by roller, and then a cloud-white glaze coat ragged to the walls to create a soft cloth-like effect. When the base coat dries up, prepare the glaze mixture and apply it with cheesecloth, a rag, or microfiber cloth.

Slowly dab paints across the wall with the rag, preventing too much paint. You should be able to see the original color via the glaze coat. The ragging method used walls a two-toned color density, creating the look of leather or faded, soft mottled cloth on the walls.

4. Texturing

If your walls are in bad shape/rough shape over a sizeable area, repainting the entire room is the best option. Textured paint doesn’t show little imperfections by distracting the eye.

More massive textures do the most significant job of camouflaging imperfections but may look overwhelming in smaller rooms. Lighter textures work best in bathrooms and other small spaces.

You can purchase or order a premixed textured paint or add texture to your favorite regular paint. Both options are available at any home improvement store. Use a roller for easy application, or get creative with a trowel, traditional paintbrush, or foam brush.

Read Also: Wall Paint Designs With Tape

5. Color Washing

Color washing the walls will simply give them a mottled look with tonal variations that hide flawed, uneven walls.

Alternatively to the paint-ragging technique, color washing involves two colors: a dove gray base coat and a soft pearl-gray color-wash coat applied with a paintbrush or a sponge.

The variations and shadows produced by the two colors add both depth and warmth to walls while hiding defects and errors.

6. Dry-Brush Technique

The dry-brush paint technique adds a second color in a slightly darker shade or lighter tint than the base color on the wall. Use two colors in the same color family, such as salmon rose for the base color, and add white to it for a pale white-pink to blend the colors.

Allow the paint to dry after using primer on the wall and a base coat by roller. Then, dip a dry brush into the other paint color and apply it to the uneven wall. The secret is to not put a whole lot of paint and diagonally apply the dry-brushed paint on the wall in 8- to 12-inch strokes.

For the second time, you are adding a coat of paint in the same strokes, diagonally from the opposite direction, to cross over the initial brushstrokes. This technique gives the wall a slightly textured and dramatic look.

7. Tuscan Faux Finish

The Tuscan faux finish simulates the look of walls in old villas from the Tuscany region of Italy. It’s similar to the rag and dry-brush techniques – once the base coat is dry, add a topcoat in a slightly different color to create the look of timeworn stucco.

For example, paint the walls a warm light copper, and add a second coat in a teal brushed on in a crisscross dry-brush technique or applied with a sponge. This color combination gives the wall an aged copper patina look.

You can also add colors in the same family or a muted wheat color overlaid with a sponged pale yellow.

How do you paint a room with uneven walls?

Protect the edges of the room with painter’s tape.
Apply elastomeric latex paint to the uneven wall surfaces. Use a roller for main surfaces, and a brush for edge-work. Elastomeric wall coatings (EWCs) are formulated to be very thick, yet pliable.
Remove the painter’s tape once the elastomeric latex paint has dried.

What is the best way to cover an uneven wall?

If you don’t want to paint or wallpaper your lumpy walls, the easiest way to camouflage the bumpy texture is to hang photos, artwork or other framed items to cover the problem areas. Because the uneven texture may span a large section of wall, one or two framed pieces are probably not enough to hide the lumps.

What is rag rolling painting?

In rag rolling, you work with a roll of cloth that produces a rhythmic linear pattern – in contrast to the random effect of the loosely bunched rag in all the other rag painting techniques.

Is sponge painting still popular?

Sponge Painting Techniques: And although sponging in high-contrast paint colors and with a heavy-handed technique has since fallen out of favor, this finish is still popular and can look very relevant if you follow the color advice and use updated color combinations as suggested on this website.

What is the best paint for uneven walls?

Matte finish will hide the most damage; look for flat paint and buy a quality brand with good coverage to even out slight imperfections on the walls. Low-luster finishes minimize flaws on the surface of the walls — these are branded eggshell and satin finish, and they have very little shine.

How do you smooth uneven walls before painting?

Skim coating, the process of covering rough walls with a thin layer of joint compound, will smooth out the wall surface. You can then add another texture, or wallpaper or paint over it.

How do you hide uneven walls when painting?

The more reflective or glossy the paint sheen, the more noticeable those imperfections will be. Conversely, flat or matte finishes absorb light, helping to hide bumps and bruises. So, paint with a flat finish is the most effective paint for hiding wall imperfections.

What is Polycell Smoothover?

Polycell Smooth Over is a quick and easy way to transform cracked and damaged walls and floors to a perfectly smooth surface, which is ready to paint. It fills imperfections such as cracks, gouges and small holes. It is easy to use and can be sanded when dry to remove any tramlines.

How can I make my walls smooth without plastering?

How to Smooth Walls Without Plastering (5 Methods to Follow)

  • Fill Holes or Cracks. Before you do anything, fill any holes and cracks in your wall.
  • Sanding. If your old plaster is a bit lumpy and bumpy, sand it to smooth out any bumps.
  • Clean the Wall of Scuffs & Marks.
  • Hang Wallpaper.
  • Paint Your Walls.

Is Gray going out of style 2020?

In fact, the majority of designers agreed that we are going to see less cool grays and whites in 2020. “Gray will move into an accent position, and no longer be a main color,” one said. Designers also say there will be more of a focus on more playful decorating, when it comes to both colors and textures.

Conclusion | How To Paint Uneven Wall

Admittedly, painting technique for uneven or damaged walls is a challenging task for amateurs. To ensure your uneven walls are restored properly and beautifully, you have to pay close attention to the basic guidelines and steps listed out for you.

This article has done a great job by breaking down all the details needed as a painting technique for an uneven wall. If you follow these steps bit by bit, you are assured of achieving a positive result like a pro.

Related Posts On Painting techniques for uneven walls: