Removing latex paint from concrete might sound like a strenuous clean-up process that will take a whole day up. But guess what? It doesn’t.
In fact, it is way easier than you think because latex paints are water-soluble based. And they are surprisingly easy to clean, unlike oil-based solutions.
All you need is a Lift-Off paint remover, 2 hours from your day, a bucket of soapy water, a clean cloth, and a scrapper while keeping our guide on how to remove latex paint from concrete handy.
You DON’T need any heavy-duty tools or whatsoever!
How to Remove Latex Paint From Concrete
So, if you have accidentally slipped a latex on the concrete or you wanted to remove old latex paint from the surface and add a fresh coat, you are on the RIGHT page.
Even if you’ve never done it before, our non-exhaustive guide on how to remove latex paint from concrete takes you from scratch to finish.
And, it doesn’t matter if the latex is dried or has bonding agents underneath it. You can take it all out in less than an hour.
So are you ready?
Then, let’s get the ball rolling.
Things you may need for the Job
- Warm water
- Paint scraper
- Clean cloth
- Soft brush
- Good paint remover
Ensure you have all of these tools in place before you proceed, as you be using each and every one of them.
Situation 1# Fresh and Small spillage
If you have accidentally spilled latex paint on the concrete wall, driveways, or garage floor, it’s a good thing you can remove it without doing much.
Remember, we said latex is a water-based paint. Therefore, it can respond well to warm, soapy water if the spill is relatively small and fresh.
So quickly scrape the spill off of the concrete surface using a paint scraper with a straight, flat edge.
By scraping it first, you’ll reduce the cleanup work by half.
However, if you’re having a bit of a hard time with few tough spots, you should continuously apply warm soapy water (on the surface), along with your paint scraper.
And, once you’ve done that, try dabbing the warm soapy water on the leftover paints, allowing the water to loosen the spot. And then resume scraping.
WARNING! This method only works if you start the cleanup immediately after the splatter or spillage occurs. However, if you don’t, you may find it challenging.
Read Also: Best Way to Remove Paint from Concrete
Situation 2# Old Dry Latex paint
Step 1: Prepare the Concrete Surface
The first thing first is to put on your glove before doing anything. Then, use a broom or a vacuum to sweep clean the surface area from dirt and debris.
Secondly, try using a paint scraper to scrub the paint from the surface.
Now, this line of action might not be helpful, as it removes only a tiny fragment of paint. However, what it does is it creates a path for step two.
Step 2: Apply the paint remover
It’s always advisable to use a paint remover that is compatible with the paint on the concrete. It is because strippers designed for specific paint will be 5X more efficiently compared when using random products.
Make sure the paint remover is suitable for latex materials else you may not like the result.
You should apply the solution with a paintbrush. Sorry, there isn’t a unique technique for that, but you should apply the formula as you would when painting walls.
Step 3: Allow the Stripper to work
At this stage, you want the stripper to sit on the concrete for a while.
But not so fast! In order to yield a good result, you must check the manufacturer’s direction printed on the can.
The time frame should be somewhere around 1-8hours – give or take.
In most cases, it only takes a few minutes. As for Motsenbocker’s liftoff, it takes about 60 seconds to rip apart the molecular bond between the paint and the concrete.
The idea of letting the stripper sit is it softens the paint – breaking/loosen its bond from the concrete.
Step 4: Scrub the Concrete
Use the same paint scraper or scouring pad to remove the loosened paint from the surface. Although, you can use a pressure washer if it’s an outdoor concrete surface like patios or driveways.
Step 5: Repeat steps 3 and 4 if need be
Most time, not all paint will come off that easy. If this is the case, then you should reapply the solution to remove any residues from the concrete.
Step 6: Clean the concrete surface
Dip the clean cloth in the bucket loaded with soapy water and wipe down the area, removing any residue.
If the concrete is vast, you can as well use a power or pressure washer – that will save you the hassle.
Read Also: What Kind Of Paint Can Be Used On Concrete?
Does vinegar remove paint from concrete?
Safely Remove Paint from Concrete Floor with Vinegar
Vinegar is an inexpensive everyday cleaning product that doubles as a natural paint remover and a way to take care of an oil stain on driveway surfaces. Use vinegar to get paint off concrete without resorting to a toxic chemical paint stripper.
What is best product to remove paint from concrete?
We recommend using a mixture of trisodium phosphate and water to remove stubborn spray paint stains. Trisodium phosphate is a chemical compound that can be used to remove stains and grease from concrete.
What will dissolve latex paint?
Alcohol is a well-known cleaning agent for dried latex paint. The solvents in commercial latex paint removers are various types of alcohols, but you can use isopropyl — or rubbing — alcohol as well as denatured alcohol from the paint store.
Does WD 40 remove concrete paint?
WD40 is a light penetrating oil that can be effective in loosening latex spray paint from concrete surfaces.
Does vinegar dissolve latex paint?
While there are plenty of paint removers, vinegar is a reliable non-toxic solution and offers an easy way to soften the paint before removing it. And it works well on different types of paints. You can even use it to strip dried latex paint from woodwork.
Will a power washer remove paint from concrete?
Pressure washing is one way to remove paint from wood, metal, concrete, and other exterior surfaces. Selecting a pressure washer with a range of 2,000 PSI to 4,000 PSI will give you the most effective power for removing peeling paint. As with all power equipment, always wear safety glasses and closed toe shoes.
How do you get dried paint off of concrete?
A deeper look at how to remove paint from concrete
- Give the concrete surface a deep cleaning and allow it to dry.
- Apply a paint stripper.
- Give the paint stripper some time to set.
- Scrub the surface.
- Follow up the scrubbing with a power wash.
- Repeat the process as necessary until all the paint is removed.
How do you strip latex paint?
Denatured alcohol, a clean rag, and a lot of patience can remove latex paint without damaging wood. Oil-based paint spatters require mineral spirits, but be careful not to soak the wood, as this will cause damage. Wipe thoroughly with clean water and dry once the paint is removed.
Does goof off remove paint from concrete?
The first thing to do is saturate all the paint stains with your chosen paint remover solution. We recommend Goof Off for most stains since it’s a tried and true paint remover for spray paint. If it’s too abrasive and seems to be stripping your concrete too quickly, opt for a different solution.
Will Goo Gone remove latex paint?
Remove unwanted spills by blotting or wiping with a clean cloth or paper towel. Apply Goo Gone’s Latex Paint Clean Up directly to the area and wait a few minutes for the formula to soak in the paint. Wipe with a clean cloth, repeat if necessary.
So as you can see, there is nothing too intense about learning how to remove latex paint form concrete. The only thing that might impede you is the tools.
Just as doctors have stethoscopes and scalpers, you should have the above tools, or else, you may find it difficult to yield positive results.
Lastly, ensure you stick to the manufacturer’s time at which the paint remover should sit on the surface. Failure to do so might lead to a valley of disappointment.