How To Paint Mesh Metal Patio Furniture

In this article we are going to discuss about how to paint mesh metal patio furniture at same time importance of patio furniture. Let us discuss about patio furniture.  Let us see how it is used for interior designs. Importance of patio furniture for home design in living room, dining room, bath room entire house.

How To Paint Mesh Metal Patio Furniture

Mesh Metal

Painting mesh metal patio furniture is actually pretty. In this article we are going to explain these exact steps in greater detail hence you can fully refresh the paint job on your mesh patio furniture pieces. The main important things you need when painting mesh metal patio is brush and sand. for new look you may need two or three coats.

Can You Paint Mesh Metal Patio Furniture?

Obviously the answer will be “yes”. By painting mesh metal furniture you can keep it looking newer for longer or even to give your patio a different look. The good quality mesh furniture lasts for years. Painting it is the perfect solution. When you paint it perfectly then your output will be perfect. When the painting is not perfect then it will not get a good look.

Paint Mesh

It is very hard to paint mesh. But don’t worry there are some great products to help you and we will take you  and what to do with them. Before painting your metal or outdoor be sure that the paint you choose is suitable for metal or outdoor. You might also need to add primer depending on what type of paint you choose. Refresh your outdoor patio cloth at the same time.

Preparing Outdoor Metal Mesh Furniture For Painting

Before painting your metal mesh furniture there are few steps to take. You need a smooth and clean surface for painting otherwise you will end up with an unattractive texture. Pick a nice dry day for renovating old metal furniture as it is an outdoor job. To prepare your metal furniture for painting you need a wire brush and a range of sandpapers in different levels of sand. Acetone is good for cleaning after you have sanded. Follow these steps given below.

Scrub With Wire Brush

scurb with brush

Start by giving furniture a good scrub with the wire brush. As the mesh portions are harder to prepare for painting hence the short hair of the brush should fit neatly into the little gaps. These brushing is because to remove the bits of paint and general dirt, dust before you get sanding.

Smooth Surface With Sandpaper

smooth surface with sand paper

The next step you should do is creating a smooth surface for painting using sandpaper. In large areas you can use a palm sander where as smaller portions can be easier to hand sand. Start with a rougher grit and work towards a smoother level until you are happy with the finish of the surface.

Good Brush

good brush

Give the furniture a good brush to remove fragments and dust. After it brushed you will wipe it down with acetone to look extra clean. Leave the furniture to dry before getting on with the priming and painting. In that case when the chair or table is dry cover off the areas you don’t want to paint. Cover these areas with painter’s tape and newspaper to protect them from spraying.

How Do You Paint Steel Mesh Furniture?

Here are our step-by-step guide for preparing and painting steel mesh furniture using a spray paint.

  • Choose a well-ventilated space like outdoors on a dry day. Put down a cloth for protecting the floor.
  •  Start by brushing the furniture to remove flaky paint, rust and all the dirty particles.
  • When you need a smooth and clean surface for painting rub down the furniture with sandpaper. The rubbing should start with a rougher grit and move onto a smoother grade.
  • Brush the furniture to get of the dust after completing then wash it by using soapy water or acetone depending on how dirty it looks.
  • When you don’t want to paint the entire piece cover off the paint-free areas using painter’s tape and something like newspaper. Shake it well when you are using a spray primer then apply the first coat.

  • It is not always possible to prime or paint the whole piece at once. So spray as much if the surface as you can reach and then leave it to dry after that turn the chair or table over hence you can reach the underside. When the primer has dried it’s time to paint.
  • As the paint protects from rust as well as making the furniture look nice it is important you to cover the whole surface even the unseen parts.
  • When it is dry apply the second coat in the same way. You may even need a third coat especially if you are using the 2-in-1 primer and paint option.
  • Leave it to dry thoroughly. If you have used painter’s tape and papers to mask off an area gently remove it. Now stand back and look your handwork. It’s like a whole new piece of furniture.

Conclusion

While easy to do if you follow the steps above painting your mesh metal patio furniture will still take some physical work. Here, I have come to the end of the article on topic how to paint mesh metal patio furniture. I tried my level best to include all the necessary points that are required related to the article. I do hope my article would be interesting and may be ever knowledgeable.