How To Install Transition Strip On Vinyl Plank Flooring(7 Steps)

In this article we are going to discuss about how to install transition strip on vinyl plank flooring. There are many different types of flooring to choose from, and deciding which one is right for your home can be difficult. Problems arise when the flooring in one room differs from the flooring in another. Since vinyl plank flooring does not flow seamlessly, we will explore how to install transition strips on it!

How To Install Transition Strip On Vinyl Plank Flooring

How To Install Transition Strip On Vinyl Plank Flooring

If you want to get a seamless transition between flooring types, you will need to take several steps. There are a variety of transition strips to choose from, so be sure to research which one is best for your needs. This step matters because it will level the flooring. To install transition strip on vinyl plank flooring, follow these steps: 

  • Determine the two flooring types that will need to meet at a level surface.
  • Based on your flooring types, choose the appropriate transition strip.
  • Measure the length between door jambs.
  • Cut the transition strip according to your measurements.
  • Apply adhesive to the bottom of the connection base.
  • Lay and secure the vinyl planks into place.
  • Install a multi-purpose reducer into the base strip.

These are the general steps to installing a transition strip on vinyl plank flooring. There are a few transition strip options you will need to become familiar with. Which flooring you use depends on the type of flooring you’re accommodating for. If you’d like to know more, keep reading ahead.

How To Install Transition Strip On Vinyl Plank Flooring

1. Determine the Two Flooring Types

In an ideal world, you would use the same type of flooring throughout your home. Different flooring must be used in different rooms to create a seamless transition between them. In order to ensure that people know there might be a height difference between floors, you will need to install a transition strip. You can use the LED light to see what’s under your feet.

Determine the Two Flooring Types

The essential concern here is how thick one flooring is in comparison to the other. In our case, it will be either be:

  • Vinyl to carpet
  • Vinyl to tile
  • Vinyl to laminate
  • Vinyl to vinyl

2. Choose the Appropriate Transition Strip

When it comes to vinyl plank flooring, you will need to determine which type of flooring will fit with the rest of your decor. To determine which transition strip works best for your situation, here are some general guidelines: 

Choose the Appropriate Transition Strip

  • Near the same height – T-mold transition strip
  • One lower than the other – Baby threshold or multi-purpose reducer

3. Measure the Length Between Door Jambs

Measure the Length Between Door Jambs

From here, you need to measure the distance between door jambs. The width of the doorway between your floors is what you need to measure.

4. Cut the Transition Strip According to Your Measurements

Cut the Transition Strip According to Your Measurements

To cut the transition strip, measure the width of your fabric and then cut it to that length. Draw a line on the paper with the measurements you took and make a mark where the line intersects with the desired length. Cut the transition strip in the area that you marked. You can use a handsaw, a power saw, or tin snips for this step.

5. Apply Adhesive to the Bottom of the Connection Base

To make the connection base for your garden hose sturdy, you will need to apply adhesive. To secure the strip to the ground, you will need to apply adhesive. The edge of the plank that will be facing the direction you are laying it should be wide. 

6. Lay and Secure the Vinyl Planks Into Place

This step is the most important part of the guideline. Lay down the vinyl planks and secure them with a screwdriver. 

For you visual learners, here’s a YouTube video for demonstration purposes:

7. Install a Multi-Purpose Reducer Into the Base Strip

If you are using a multi-purpose reducer, you will install it into the gap firmly. If you are using a T-mold, you will attach it to the side of the door with screws. To remove excess adhesive, you can use a damp cloth. To ensure the molding dries well, you can place tape over it or weight it down using heavy items.

Why Do You Need Transition Strips?

Why Do You Need Transition Strips

Transitions strips are used to distinguish between different types of flooring. Without the right flooring, a transition between two types of flooring may look dull and jarring. As some suggest, these shoes are a means of telling you what’s under your feet. If you ever trip when transitioning between different flooring types, a transition strip might help prevent the scare. A stairway bridge connects two floors of different heights. It covers the gap between the flooring and is sturdy enough to support people walking or climbing on it.

Conclusion

Here, I have come to the end of the article on topic How To Install Transition Strip On Vinyl Plank Flooring. I tried my level best to include all the necessary points that are required related to the article. I do hope my article would be interesting and may be ever knowledgeable.