faux painting ideas for bathroom

15 Brilliant Faux Painting Ideas for Bathroom

The bathroom is an integral part of your home. You can make it an attractive lot without going through the usual painting process, why not try these faux painting ideas for bathroom?

This technique has been around for some years. It helps you to create a fantastic nuance and texture for your bathroom by copying the look and feel of suede, striped walls, and other surfaces.

In this article, you’ll see the 15 faux painting ideas for a bathroom you can use to turn your bath space into an attractive member of your house.

Faux Painting Ideas for Bathroom

faux painting ideas for bathroom

[su_note note_color=”#ebeec6″ radius=”5″]You’ll be surprised at the various faux painting options for a bathroom out there.

If you’ve been looking for the best way to touch up your bathroom walls apart from the usual painting, then these designs should serve as an inspiration for you.

1. Color Washing

color washing wall design for bathroom

Otherwise known as “broken finish” technique, color washing can enable you to replicate an attractive finish. You can create the impression of a well-painted room weathered by repeated use and time.

The process is amazingly simple: Just apply a translucent and thin glaze over a different base color that gives an appealing contrasting look. With feathery brush strokes, give the bathroom a soft and mellow texture.

Start the entire process by priming the surface with a trusted color, then apply a tested interior paint as the base color once the primer has dried. Allow the base coat to dry.

Use a sponge or rag to apply the paint mixture or glaze, a circular or wiping motion will do the magic. Don’t forget to give the topcoat enough time to dry once you have the desired look.

2. Marbleizing

marbleizing wall design for bathroom

This unique and highly attractive design is inspired by the intricate patterns and vibrant color variations of natural marble.

Marbleizing is a faux painting process that involves putting tinted glazes over a base color coat. The objective is to replicate the catchy appearance of marble.

To start with, use a high-quality interior sealer or primer to prime the surface – a small roller will be apt for this job.

An angled paintbrush will also come in handy for the edges and some hard-to-reach parts of the bathroom, then allow the primer coat enough time to dry completely.

Furthermore, apply a base coat of your chosen color with a small roller applicator. You want to make it lighter than the base color for the desired result.

Then, use a rag or paint sponge to create a blotchy or mottling marble pattern with a darker shade of the base coat.

Use the sponge to smear and dab the surface. When painting the counter, use different patterns to make it more appealing.

With your artist’s brushes, create some vein-like patterns. Unleash your creativity during the paint to get the best out of the marbleizing.

With uneven moves, make diagonal “K” or “Y” shapes. These shouldn’t be too uniform or straight to make the right statement with the shapes. Reinforce darker-colored veins with lighter ones and vice versa and allow them to dry.

Use a mini-roller to add a glaze to the bathroom to complete your work. Once you are done and the glaze has dried, enhance its brilliance with some coats of sealant or polyurethane.

Then, use the large paintbrush or roller for varnish application. Wherever you need some finely-tuned strokes, a small brush will do the job.

3. Strie Technique

strie technique wall design for bathroom

[su_note note_color=”#ebeec6″ radius=”5″]This faux painting technique is also known as “dragging.” It is a simple process with a fantastic effect on the wall.

Apply a base coat on the wall and put a colored glaze over it. Then, pull a brush through the glaze as the wall to give you a high-end and luxurious look.

Prime it with an interior primer or sealer of repute, with a roller or a brush. Allow it to dry. Apply the base coat with the same priming technique, and give enough time for it to dry too.

Use a different color for the glaze topcoat to produce an attractive contrasting image.

You can also use a brush or roller to apply a paint mixture or acrylic glaze over the topcoat. Vertical strokes made from the top of the bathroom to the bottom will give the best result.

Finally, drag a large paintbrush with long bristle through the paint with soft, long, and vertical strokes. Do this from the top to the bottom and allow the glaze coat to dry.[/su_note]

4. Stripes

stripes wall design for bathroom

This technique allows you to create personalized patterns that suit your taste. You can make horizontal or vertical patterns with customized colors that will boost your décor.

A paintbrush or a roller is the best tool for applying the base coat. You need to allow the base coat to dry before making the stripes.

Using a measuring tape, a ruler, and a pencil, mark and measure even intervals along the bottom and top edge of the bathroom wall. Make uniform measurements. Repeat this along the length of the wall.

Mask out vertical lines with the painter’s tape from the top to the bottom marks.

5. Rag Rolling

rag rolling paint design for bathroom

The rag rolling technique is good for creating an old leather look in the bathroom. Use a bunched up or twisted rag to roll pain in an irregular pattern to create the right effect.

For a “roll-on” effect, use a roller to apply the base coat, wring out a wet cloth or rag and dip it into the glaze until it is saturated.

Roll the rag and twist it to make a ball, roll it across the surface of the dry base coat, and then reload the rag as many times as needed.

6. Crackling

crackling wall design for bathroom

If you want a weathered and aged look on the bathroom door, consider the crackling technique. You need two colors of paint to create a crackling appearance.

Apply a base coat with a roller, then allow it to dry completely. Use a paintbrush to apply a coat of crackle medium and allow it to dry as well. It’s also essential to stick to the manufacturer’s drying time.

Furthermore, apply a coat of interior paint with a roller, and the coat will start crackling as it dries, showing the underneath base coat.  Finally, protect the paint with an acrylic sealant after some days.

7. Diamonds

diamonds wall design for bathroom

A diamond pattern will beautify your bathroom and add elegance to it. It is one of the best ways you can add a ‘wow’ factor to the bathroom.

To achieve this type of faux painting idea for a bathroom, apply a light-colored base coat to the bathroom, and allow it to dry. Then create some diamonds with a tape grid.

The next step is to fill each grid with a contrasting color to make a perfect look and feel. Alternatively, you can use another finish with a similar color to the base.

First, measure the wall and divide its width by the specific number of the diamonds you want. Then, multiply that number by two to give you the diamond height.

8. Lime Washing

lime washing

Another name for this technique is “whitewashing,” and it creates an aged look that will look great on your bathroom.

For this type of faux painting, mix an interior paint with water in a flat finish. Aim for creamy texture consistency for a chalky look after drying. You can also add more water if you want to achieve a thinner finish.

Using a paintbrush, apply the mixture and allow it to dry off – after which you should add a layer of protection to the surface with a latex varnish finish.

9. Stenciling

stenciling wall design for bathroom

Stenciling is an effortless decorative painting technique. To make the stencil appear larger, use a too-small window border. Below the ceiling, use a border on the wall.

You want to be as creative as possible and experiment with different colors. Additionally, if you can handle it personally, go ahead and come up with amazing designs, or simply buy a ready-made design if you cannot.

You will find a great variety of stencils in different styles to choose from. Make the right choice.

10. Pickling Wood

Pickling Wood

Pickling shares some similarities with lime washing; the result is usually a lighter color door.

To start the process, use medium-grit sandpaper for sanding the wood, then mix three parts water with one part white primer for the painting. Use a small-sectioned paintbrush to apply the solution.

Apply the solution to the wood with a clean, dry cloth – do this against the grain. If there is an excess solution, remove it with a new rag by dragging it along the grain.

Once the solution dries, apply an acrylic sealant to improve its appearance.

11. Verdigris Finishing

verdigris finishing design for bathroom

If you have a thing for copper or bronze, give your bathroom the look of an old copper or bronze with this technique.

Clean and sand the surface you want to apply the finishing first, then apply a coat of gold hue or metallic copper and allow it to dry. Once it dries, use a sponge to apply dark green paint on it.

Using a sponge, apply light green paint on it once the first coat has dried. Make irregular patterns with the sponge, and for the perfect mottled effect, use a paper towel or rag to blot the pain.

For protection, cover the surface with a coat of clear acrylic finish – you can make it two if you wish.

12. Faux Marble

faux marble wall design for bathroom

Give your bathroom an elegant look with this remarkable technique. Since marble is a bit expensive, the faux marble finish is not only budget-friendly, it is equally attractive.

For this particular faux painting option, get a white paint with a touch of a satin finish to paint the wall. Then, choose two colors with the same accent and family. With a brush, apply the colors to small portions of the wall beside each other.

On the wet paint, apply the two colors into the wall with wedded-up cheesecloth, and blend the colors together. Do this to small sections of the bathroom until you cover the entire wall.

Once the paint is dry, create the patterns of real marble with white paint and a wide variety of small brushes.

13. Faux Tile

faux tile wall design for bathroom

Tiles are generally used to cover and beautify a bathroom wall. However, if you don’t have the budget to go for expensive tile installation, a faux tile finish is a great alternative.

A plaster wall will bring the best out of the faux painting. However, you can mix the sand with the paint for the same result.

Start with a light base color such as beige, white, or gray. After drying, create a grid by snapping some chalks on the wall. To create grout lines, use a painter’s tape to mark off the grid, and use your accent color to fill the squares.

Spice things up by using several shades of color from the same family that will improve the texture. Sponge the colors on the wall in layers to create a realistic and appealing look for your faux tile.

14. Brick Design

brick design wall for bathroom

You can also create the illusion of a set of bricks in your bathroom. You need a serrated kitchen knife and some synthetic sponges to do this.

Use the knife to cut the sponges into the size and shape of a brick, then space the bricks and use glue to join them on plywood.

With a roller, paint the brick on the stamp sponges, brick-colored paint will give you the desired result. Repeat this process until you cover the entire surface with the imaginary block.

15. Sponge Painting

sponge painting wall design for bathroom

Sponge painting is another faux painting idea for a bathroom you can experiment with. It is a straightforward and efficient way to give your bathroom interior walls a dramatic feel and look.

Get a sponge, some paint colors, and a can of glaze to transform your bathroom.

You can find out how to go about this because the steps are beyond the scope of this article.

How do you faux paint a bathroom?

Start by painting the wall with white paint that has a satin finish. Next, choose two accent colors from the same family and apply them in small areas next to one another with a brush. While the paint is still wet, use a piece of wadded-up cheesecloth to rub the colors into the wall and blend them together.

How do you paint a wall with a rag?

Dampen the rag and wring it out well. Bunch the rag into random folds and creases (the fewer flat areas, the better the look). Dip the rag into the paint and dab excess onto a paper towel. Start at the center point of the wall and press the rag on the wall gently, working in about a 2-foot area.

What is faux finish painting techniques?

Faux finish painting is a technique that creates texture and nuance by replicating the look or feel of other surfaces, such as striped wallpaper, suede, or marble.

Do you need glaze for faux painting?

Many faux and decorative paint techniques require glaze; it’s essential to create rich, dimensional paint treatments. When you’re using lighter paint colors, a 4-to-1 mixture will not affect the value of the color. But darker colors may be altered to a lighter color value when mixed with too much glaze.

Can you paint over faux paint?

Surface preparation is the most important step to successfully painting over a faux finish, particularly if the faux finish has texture. If your walls are textured, you can sand the surface to remove it. Use a random-orbit sander to remove the texture and return the wall to a smooth finish.

Can you use a sponge to paint?

Sponge painting is a quick, simple way to make dull interior walls dramatic. With just a sponge, a can of glaze and a few paint colors you can transform your house.

How do you faux finish a wall?

Advanced Wall Painting Techniques

  1. Start with a primer, if needed.
  2. Apply your base color coat of flat or satin paint.
  3. Apply another paint in a lighter hue.
  4. Let it dry.
  5. Take an artist’s paintbrush and draw thin swirls throughout your wall.
  6. When your swirls dry, cover your walls with glaze, and then add a sealant.

How do you paint mottled walls?

Simply use a twisted or bunched up rag to roll paint on or pull it off irregularly, to create a mottled effect. Whether you want something subtle or bold and dramatic, rag rolling is a simple way to make a big impact on walls in any room.

What kind of paint do you use for faux painting?

Choose your paint colors, selecting a base coat and an additional two, three or even four colors to sponge on top. The more colors you use, the more depth you’ll create. Select your base coat in an acrylic or latex with a flat, satin or eggshell sheen. Sponged-on layers should be satin, eggshell or semi-gloss.

Is faux painting expensive?

Faux painters charge by the square foot, depending on the products and amount of labor needed to create an effect, but usually need to see project to bid it. Prices usually range $1.35 – $4 per square foot for most projects, though some specialty products and techniques can cost as much as $5 – $10 per square foot.

Faux Painting Options for a Bathroom | Conclusion

As you can see, you have a wide range of faux painting ideas to choose from. Depending on your preference, any of the options discussed in this article will transform your bathroom.

Just take your time to go through the ideas one after the other, and then choose one that you think will give your bathroom that magic feels you want.

Related Posts On 15 Brilliant Faux Painting Ideas For Bathroom: