Best Paint For Concrete Walls

Best Paint For Concrete Walls

There are no doubt concrete walls can withstand almost any impact. However, they do break sometimes. Concretes are prone to creaking, leaking, mildew, and mold formation that are health-threatening as time goes by.

So, you must hurry to paint any unpainted or old-painted concrete if you have one around the house.

But, before you start to panic on which paint to use, we have already weeded out the best paint for concrete walls restoration that skips the hassle, so you can rejuvenate your concrete wall correctly – all by yourself.

So, without further ado, let’s drive into it.

Best Paint For Concrete Walls

Why Paint Your Concrete Walls?

concrete wall paint reviews

Replenish the Livability of Your Home

Unpainted concrete looks unappealing and drab. Worst-case, the smell from it is infuriating.

Nobody wants to feel uncomfortable in their own house or see their visitors in a hurry to leave, knowing the looks of your walls is the cause – it’s embarrassing.

And, the most promising cost-effective way to spruce things around is by painting the walls. Adding a fresh lick of paint will not only transform your unattractive wall into a drop-dead gorgeous but also add a cozy ambiance to the room.

Prevention against Damage

The prolonged exposure to natural elements like moisture and sun may cause the concrete blocks to break down.

So, aside from the aesthetic concerns, using the best paint for concrete walls will help seal surface imperfections and shield it against water penetrations that lead to creaking, separating, as well as degradation of the block quality.

So you’re more or less killing two birds with one stone. You’re adding curb appealing while extending the longevity of your property. Make Sense?

It’s a cost-effective solution

Giving a second life to a dead wall shouldn’t have to be expensive or complicated –although it’s a bit different from painting a woody surface.

Rather than running the expenses of calling a professional painter to hand the job, you can make it a do-it-yourself project.

It is so easy you can accomplish it yourself by using a brush or roller. Anyone can do it.

Also, our top picks are not expensive. However, if you’re into high-quality paints that really gets the job done, we have you covered.

Read Also: How to Remove Paint from Concrete

Concrete Wall Paint Reviews

1. Liquid Rubber waterproof sealant

This product is multi-purposeful, which means you can apply them on other surfaces aside from concrete walls.

It produces a protective finish for concrete wall, sloped roof, flat roofs, metal roofs, sheds, basements, wood, planter boxes, foundations, and more.

I often call the Liquid Rubber waterproof Sealant the master of adhesion because the final membrane has over 1000% elongation that prevents adhesion failure. You can NEVER go wrong when using this product.

More precisely, it has a UV stable that shields the sun from degrading the quality finish.

The coverage is incredible. A gallon covers up to 50 square feet for flat/ponding surfaces.

It is water-based therefore it contains no solvent, VOC, or toxic fumes. The paint is not only safe for humans, pets, and plants alike but also breathable in close range.
Convenient for indoor and outdoor surfaces

  • Bridge seams, vents, joints, gaps, and protrusions.
  • Nature-friendly; no voc or solvents.
  • Non-flammable.
  • Takes a long time to cure.

2. Drylok 27512 Latex Water Proofer

You can rejuvenate your wall as well as preventing future damage with Drylok 27512 model.

You can bank on the latex waterproofer water stoppage. It can withstand 10 pounds of hydrostatic pressure (PSI), equivalent to a wall of water 22 feet high. Meanwhile, the ASTM D-6904 resist wind-driven rain.

Interestingly, the coat reduces vapor transfer, which protects the wall against radon gas penetration.

Aside from being a low-odor formula, it comes along with all current VOC requirements to ensure your safety, while offering the best-in-class performance.

That said, it’s ideal for interior, exterior, and above/below-grade masonry surfaces. The breathable film does not trap moisture in the masonry.
Available in 9 colors

  • Fast-drying time (2hrs) recoat in (3hrs).
  • Environmentally friendly.
  • Applicable to many materials.
  • Most users complain about poor packaging.

3. Rust-Oleum 206438 NCF Chalkboard Paint

The Rust-Oleum 206438 convert almost any surface into a writable-Erasable Surface. It produces an ultra-hard, scratch-resistant layer with superior durability.

The product is easy to apply. You can roll or spray on the solution.

Also, Rust-Oleum 206438 is non-toxic. It’s breathable, and works well on interior concretes (vertical or horizontal), glass, plaster, masonry, drywall, metal, wood, unglazed ceramics, and more.

I’ve seen this product absorb massive abuse without changing the color or the look of the paint. Additionally, it doesn’t leave behind a visible surface film. It will retain its natural unsealed look the entire time.

The substrate is easy to use. If you’re a DIYer who loves starting ASAP and expects nothing but a professional result, Rust-Oleum 206438 is your best bet.

Read Also: What is The Cost of Painting a Kitchen Cabinet?

The product contains up to 5X more active ingredients compared to other competing products. And, it is ready to apply right out of the gallon – feed it to the sprayer or roller, and you’re ready to go.

  • More durable than other products.
  • Contains no VOC.
  • It provides nothing but professional result.
  • Some stains are different to clean.

4. Ames Blue Best Paint for Concrete Walls

Ames Blue Max is a special blend of adhesive and high strength elastomeric liquid rubber that creates an unbreakable shield against water, UV, thermal cycling, salt, and harmful chemicals.

Due to Ames Blue Max is UV sensitive; if exposed to sunlight, you must add a topcoat.

It’s a new impenetrable rubber technology that has over 800% elongation for waterproofing in extremely wet areas like basement walls, cisterns, as well as grade foundations.

Even if the surface has cracks and crevices, Ames flows into the opening as a liquid and set up as a sturdy rubber that seals leaks wherever they occur.

A gallon of Ames covers approximately 100 square feet and dries to a tough layer that resists peeling and cracking. Also, this product remains flexible in freezing temperatures.

Lastly, it serves as a primer and waterproofing membrane for other Ames’ products. It’s an excellent coating for insulated concrete forms, concrete walls, metal, wood, and many other applications.
Vast and durable coverage

  • Ideal on damaged concrete ideas
  • Impenetrable rubber coating
  • Excellent on tons of surfaces
  • None noticed

5. INSL-X CST211009A-01 Best Concrete Paint

Last but not least is the INSL-X CST211009A-01 concrete stain paint – another best paint for concrete walls you should try.

It’s a water-reduced, acrylic concrete coating that is suitable for indoor and outdoor use. It’s easy to apply on vertical or horizontal masonry surfaces, as well.

You can either apply one coat as a stain or two coats as an opaque finish –the ball is in your court. Besides, it covers about 300-400 square foot coverage per gallon.

NSL-X CST211009A-01 is an incredible tool to leverage when tackling concrete palavers. The coating never fades or brittle in the face of harsh weather conditions or outdoor elements.

It dries fast with a durable coat that resists oils, grease, detergents, and scrubbing.

Caution ahead! Do not apply it on hot surfaces or direct sunlight. Also, it is not advisable to use this solution when the material temperature is above 90 °F (32 °C).
Wider coverage

  • It’s durable even under UV ray.
  • Ideal for interior and exterior use.
  • Non-toxic.
  • Not friendly with sunlight.

Top-Rate Paints For Concrete Walls | Buyer’s Guide

Best Paint For Concrete Walls

Choose the appropriate solution

If there is one thing that puts buyers in a confusing loop is the choice of buying concrete paint or a concrete stain for the job.

So, is paint or stain better for concrete? They both have their merits and demerits. So, let’s take a look at them below:

Read Also: Stained Vs Painted Cabinets

Concrete Stains

There are two types of concrete stains namely water-based and Acid-based stains.

Water-based stains are fast-drying and easy to clean on the concrete. Accordingly, they require the use of sealant after application to prevent fading. It demands more than one coat of stain if you want to strengthen the color.

Meanwhile, Acid-based stains work by penetrating the surface and reacting chemically in the concrete. Once dried, it becomes a permanent part of the concrete and won’t peel away, neither will it fade off.

Consequently, they are hazardous and cause severe eye, skin, and lung irritation. Therefore, the use of heavy gloves, face masks, as well as protective gear is compulsory.

Concrete Paint

Concrete paints are expensive, although they offer the versatility and performance needed to perfectly protect the concrete surface against crack, chemicals, and natural elements.

Furthermore, they work on both interior and exterior applications.

However, it requires hectic prep work like clean it with degreaser (to remove any oil or grease stains), plus the use of muriatic acid (to remove any curing chemicals on the surface) before painting.

Remember, Muriatic acid is hazardous if inhaled, and prolonged exposure causes circulatory failure. For this reason, endeavor to go through all the instructions before working with muriatic acid – if you’re using it.

Look for a Proofing Solution

Use paint that is both waterproofing and chemical acid-resistant. Why? Because they’re capable of withstanding leakage, UV radiation, and physical abuse that might result in peeling or creaking.

Read Also: Recommended Paints for Bathroom Cabinets

How to Paint Concrete Walls

how to paint a concrete wall

Below is a step-by-step guide on how to paint concrete walls:


Use a concrete patch compound to fill in all gouges, holes, or scratches. Then allow the filler to seat in, before sanding the repaired areas until they are smooth.


Use a Trisodium phosphate (TSP) and warm water to clean the concrete surface thoroughly –removing all dirt, oil, and grease that might ruin the bonding process or cause discoloration.

Use a metal-bristled brush to apply the solution. Before that, you should read the package instructions to ensure the proper ratio of TSP to water.

Lastly, Trisodium phosphate is harmful when it makes contact with the eyes and skin. So, be sure to throw in full protective gear before handling TSP.


Let the surface dry before you start painting. Subsequently, you likely to see a slight bubbling across the surface as the TSP reacts with the concrete.

Don’t chicken out, it’s normal. At this stage, you should let it bubble for 20 minutes, then hose the TSP down.

Secondly, let it dry for two days before painting. When it dries, it should feel like a 120-grit sandpaper area when you run your hand over the concrete.


First thing first, wipe the area down with a dry cloth or sweep it. Then it is paint time!

I often use the best paintbrush for walls to paint over the perimeter of the surface, because it gives me maneuverability to achieve excellent coverage when painting around edges and corners.


Use a roller for covering vast portions of the concrete


Sand or scrape away any protruding bumps or lumps that appears from the first coat. Then sweep the areas again.


Apply the second coat, but only this time, press the roller down firmly to mash the paint into the concrete for deeper penetration. Lastly, let the second coat dry for 3-5 days at maximum.

Frequently Asked Questions

Can I paint over painted concrete walls?

You can, but it is not advisable to paint over an already painted concrete without – stripping old paint because the paint won’t adhere as expected.

Thus, it’s imperative to remove any peeling or flaking paint before applying a fresh lick of paint.

Should I prime concrete before painting?

Yes, you should.

Priming the concrete before painting is compulsory, as it helps fill any gaps and cracks, as well as presenting an even surface for proper adhesion.

After using the primer, you should wait for eight hours (at minimum) before you paint. It shouldn’t exceed more than 2-3 days – so take Note!

How can I remove paint from Concrete?

To remove traces of old paint, use a chemical paint stripper to weaken the bond firstly. Then use a wire scrub brush or a scraper to remove loosened paint.

If it is an outdoor concrete such as patios or driveways, you could use a pressure washer.

The rule is to repeat the stripper process as much as possible until the paints go off from the concrete.

How long does concrete paint cures?

A concrete paint cure for 3-4 days – for exterior surface walls and floors.

Whereas, it takes about a week for a concrete driveway.

Read Also: Best Heat Guns

What is the best paint for concrete?

What Kind of Paint Can Be Used on Concrete?

  • Concrete porch and patio paints are frequently low-luster acrylic latex paints designed to conceal imperfections and resist fading, scuffing, cracking and UV damage.
  • Epoxy-based paints provide high durability and stain resistance, making them ideal for garage or patio floors.

Can I use regular wall paint on concrete?

Ordinary latex paint is well-suited for interior concrete walls. Use an eggshell or satin latex paint on concrete walls that aren’t exposed to much duress.

How do you paint interior concrete basement walls?

How Do You Apply Paint For Concrete Walls?

  • Thoroughly clean surface before applying paint. Since using a pressure washer in your basement isn’t realistic and might damage things, you can use muriatic acid to clean the concrete before applying your paint of choice.
  • Seal up any open joints.
  • Generously apply paint.
  • Quality.

Do I need to prime concrete before painting?

Generally speaking, priming is so essential to successful painting outcomes, concrete will always needs a primer. However, the existing surface needs to be primed before painting if: It is unpainted. It is peeling.

Can you mix paint with concrete?

Mixing concrete with paint is an option. The concrete mix that they are about to use is often colored with latex paint. Make sure you don’t mix too much paint into the mix, which will weaken the concrete. Concrete color mixes can be used instead of latex paint.

How do you paint rough concrete walls?

How to Paint Concrete

  • STEP 1: Patch gouged or otherwise damaged areas with concrete filler.
  • STEP 2: Clean the concrete surface with TSP.
  • STEP 3: Let the surface dry thoroughly before you begin to paint the concrete.
  • STEP 4: Brush paint onto the perimeter of the concrete.
  • STEP 5: Roll on more paint to cover the interior.

Can I use acrylic paint on concrete?

Acrylic latex paint is a water-based product that mixes and spreads easily on masonry surfaces. You can use it to paint floors, walls, steps, or any other concrete or block surface. It doesn’t take any special tools, brushes, or rollers; it’s a very straightforward DIY product.

What is concrete paint?

Concrete paint is non-reactive (similar to a water-based concrete stain) and fills the surface pores of the concrete to achieve opaque, uniform, consistent color. However, paint can chip and peel over time, especially if you don’t prepare the surface properly.

Is it OK to paint basement concrete walls?

Painting your basement walls can do more than just improve the look of your home; it can protect your foundation from water damage and moisture. For concrete walls, use a waterproof sealant to seal the porous material, and opt for a waterproof masonry paint to finish the job.

Should you paint basement concrete walls?

Remember, most foundation walls allow lots of moisture and humidity into your basement. Many paints are not strong enough to hold back the hydrostatic pressure. Even if they are able to stop the hydrostatic pressure, paint is mold food.


Never ignore a bare concrete!

Aside from its hideous look, it’s prone to mildew and mold formation. And, these fungi may provoke allergies like stuffy nose, red or itchy eyes, and skin, as well as wheezing.

Besides, constant exposure to it may lead to fever and shortness of breath or even worst.

However, using the best paint for concrete walls will safely add an aesthetic touch to the concrete and help extend its life by preventing further damage.

So, with so many benefits, you have nothing to lose. Besides, these products are multi-purposeful, with almost endless possibilities. Grab yours now!