paint edger reviews

Best Paint Edger

Whenever you’re embarking on a painting mission, whether it’s an industrial project or a do-it-yourself application, the best paint edger is the vital equipment you should have in your toolkit.

Painting areas that are too tight like ceiling lines, edges of trim, baseboards, and corners could be frustrating. If done wrongly, you could end up with a sloppy result.

But, if you have an edger for the job, you will significantly paint a neat line, as well as, edges around the baseboards, ceilings, window trim, and doors without dripping or spattering the paints all over.

Best Paint Edgers

What Is A Paint Edger?

A paint edger is a painting tool used to paint corners of baseboards, edges of walls, ceilings, and trim, as well as making straight lines.

Also, it has a few wheels and a pad attached to it that guides the paint from spattering unwanted spots.

Read Also: Best Primer for Drywall

Why Should You Use A Paint Edger?

best paint edger

Professional painters who had mastered the art of cutting-in with a traditional brush, may not find an edger quite helpful.

However, if you’re a novice or an amateur painter, edger could be a saving grace for you. Below are a couple of benefits you get to enjoy when using the best paint edger:

Get accuracy and more control

Using a paint edger guarantees a precise cut-in that eliminates the need for taping.

You can conveniently create a smooth, straight line along with the trim, windows, baseboard, and ceilings without making any error.

For this reason, the tool enables your painting project to look like a professional craft.

It’s time and energy-efficient

Paint edger makes time your friend. It can hold a large quantity of paint, which stops the stress of going back and forth to load the device with paint.

Thus, you can accomplish a task with a minimum expenditure of time and effort.

It’s versatile

Paint edger is easy to use because there are no learning curves. Besides, it works well with any kind of paints, stains, varnish, and more.

It can address a range of painting issues that painters tape and brush won’t solve if you have little or no knowledge about edging.

Convenient design and application

These tools were designed specifically for making even lines so you can get your project done efficiently, without having to sacrifice your credibility.

The innovation design aims at relieving the stress and frustration of cutting-in by featuring ergonomic handles, extension pole compatibility, replaceable pads, shields, and wheel guides.

Read Also: Best Fence Paints

Paint Edger Reviews

1. Accubrush MX Paint Edger with 11 Piece Jumbo kit

With Accubrush MX paint edger, you can cut in edges around doors, windows, accent walls, baseboards, ceilings, chair rail, and crown molding in minutes, not hours!

This product made such a tedious and time-consuming work seem like a breeze, making it is labor-saving for both homeowners and pro painter alike.

Furthermore, you don’t need any specialized knowledge before you can handle Accubrush. It’s self-explanatory and easy to use.

You can edge between five to eight feet before reloading the roller, which cuts paint edges more consistently and faster than a sash brush.

Accubrush gives a roller texture slide to the edge without slopping, due to the mini brush that pushes off leftover paints along the way to the trim line.

Aside from that, the edger has a brush that is roller and brush that is washable and reusable – so it’s not a one-time thing.

  • Lightweight MX Standard Edger
  • Replacement Rollers/brush
  • Time and energy-efficient
  • It’s suitable for door frames
  • Ideal for both beginners and amateur
  • The edger is somewhat pricey

2. Shur-Line 2006562 1000C Paint Premium Edger

Shur-Line Edger pro model features a swivel handle that turns 180 degrees, which allows flexible hand mobility on the tool.

Also, it has an attachment that allows for an extension pole so you can edge in hard-to-reach spots that are high.

The tool is ideal for an extensive project because its ergonomic handle is comfortable and reduces fatigue.

The woven pad ensures straight and smooth trimming around windows, moldings, and cabinets without any lint. Besides, the protective wheel guards assist in keep wheels paint-free gliding.

Shur-Line is inspiring to DIY decorators due to their innovative designs that help tackle painting projects efficiently while achieving a beautiful painting result.

It will give you precise edges and save you time regardless of the project size, without getting on unwanted areas.

  • It’s affordable
  • Availability for any extension pole
  • It’s lightweight
  • It has guides wheels for accurate edging
  • Demands learning curves

3. Wagner 0530000B SMART Edge Paint Roller

Wagner SMART Edge Paint Roller is trimming equipment that makes the painting task easier and enjoyable, by eliminating the tedious taping and cut-ins.

The mini roller makes it possible for reaching out to small spaces in and around doors, molding, windows, and baseboards.

There is a controllable paint flow for accurate paint delivery to your surface. All you need do is push the thumb trigger, and you’ll appreciate having absolute control over a mess-free painting session.

The device is easy to achieve a neat line without dipping or spattering. More precisely, it’s easier to clean simply flushing the roller with a garden hose.

Wagner is more efficient than a regular paint roller because you don’t get to use paint trays. The smart edger draws and retains paint directly from the can to the handle, which saves you the stress of constant reload.

Statistically speaking, the reservoir holds approximately 6 ounces of paint and covers about 96 linear feet only in one fill –you can quickly tackle any wall and ceiling makeover.

  • It saves time when painting
  • You have more control
  • You can easily add up paint
  • Ideal for larger painting projects
  • Less coverage

4. Mr. LongArm 0470 Trim Paint Edger

Cut in edges at height can be frustrating, especially considering the risks involved. But with Mr. LongArm, you don’t need a ladder because you can easily increase and decrease the height of the edger with minimal efforts.

The hand can be attached to any telescopic extension pole of your choice, to reach out to those high-hard-to-get edges.

Another feature you’d fancy is the broad horizontal and vertical guide wheels. They guarantee quick and neat lines when trimming around walls, ceilings, moldings, doors, and baseboards.

Painting with an edger requires flexibility, and that’s precisely what Mr. LongArm offers. The swivel handle holds the pad for precise application at any angle.

Read Also: How to Paint with a Roller

Also, it has a replaceable flocked foam paint pad that’s suitable for both oil-based, water-based paints, and more.

In short, this fantastic edger is 10X more efficient than a regular bush in the course of cutting in against a ceiling, molding, and other surfaces. It doesn’t dip or splatter paints on areas you do not want to touch.

  • It’s flexible and versatile
  • Inexpensive
  • You can use it with an extension pole
  • Firm pad
  • Demands learning curves
  • It’s challenging to refill with paint

5. Emery Edger Paint Brush Edging Tool

If you’re an expert painter that needs the best paintbrush for edging, you should embrace Emery Edger.

Emery tackles 100% of your trim work, without fail. The tool is easy to use and lightweight. Emery leaves no dirty wheel marks or gripping pads on your trim because it doesn’t have those shield system.

The design resembles your traditional paintbrush, but it has a two-shield system that prevents the paint from reaching unwanted areas.

You can apply paints on thin molding, popcorn ceilings, baseboard edges, uneven trim, vents, and even edges on textured drywall, without must time and frustration.

No other edger can handle difficult fixtures, but Emery. If you’re using Emery edger, you should stop wasting time removing light switch plates or vent covers on the wall whenever you want to paint.

Emery can deal with awkward trimming areas with zero taping – even the area that seems impossible without the use of tape.

  • It is a 1 ½” paintbrush with an edger
  • It provides neat cut-ins always
  • Lightweight
  • It’s compactable with paints, varnishes, lacquers, and stains
  • It’s ideal for experts only

What To Consider When Buying a Paint Edger

paint edger reviews

How can you identify an authentic edger? Below are some key characteristics a good paint edger should have.

Shields and Wheel Guides

Shields are what prevents the paint from staining unwanted areas while you’re painting. That said, it’s imperative for every edger has a shield because it eliminates the need for painters tape.

There are two types of shield called plastic shield and metal shield.

Most Plastic shield (not all though) are vulnerable as it allows paints to slip out most of the time.  Not as though it won’t contain the paints or stains, but you want to be careful not to get closer to the edge because you might make a mess.

On the other hand, metal shields are stable against the wall. No paint will leak through it so you can achieve a neat line closer to the edge.

Both metal and plastic shield prevent any slopping. But, I would rather you settled for a metal shield.

Extendable capability

Most edger comes with an extension pole, whereas others do not. An edger that permits you to attach a pole or other accessories could be beneficial in terms of height.

It allows you to reach out to top portions of the walls, which defeats the urgent need for a ladder – wasting time moving it around or climbing up and down of a when painting.


There are two things to bear in mind when opting for an edger with a considerable size.

Firstly, the edger should be lightweight and easy to handle. Secondly, it’s crucial to consider the type of surface you’re going to paint on.

If it’s a wall, a larger size edger would be preferable. However, a mini or medium size edger is a go-to option for trims and baseboards.

How to Use a Paint Edger

Watch the short video below to learn how to use a paint edger:

Frequently Asked Questions

Do I have to use painter’s tape if I use a paint edger?

No! You don’t need a tape because the shields and wheel-guides provide an easier alternative to painter’s tape.

They take away the hassle of cutting-in, painter’s tape, masking tape, and other traditional techniques.

Should I cut in before or after rolling?

Most professional painters I’ve seen case after case, cut in the corners first before rolling paint on the surfaces.

And, I do the same because it highlights the corner, which makes it less likely to paint over them.

Do paint edger tools really work?

These handy paint edgers will help you achieve a clean edge without cutting in or taping. Crisp, clean edges are the hallmark of a great paint job. Using a paint edger saves time and money because it eliminates the need to protect ceilings and baseboards with painter’s tape while still creating a nice, neat edge.

What is it called where the wall meets the ceiling?

Crown molding is decorative. Do you mean: the edge, where the edge of one wall meets the ceiling? That is called the ceiling line or where the wall meets the ceiling.

Is it OK to cut in one day and paint the next?

But you’ll get better results if you cut in just one wall, then immediately roll out the wall before cutting in the next one. That’s because if you roll out the wall right away, while the cut-in paint is still wet, the cut-in paint and the wall paint will blend much better, reducing the chance of lap marks.

How do you paint corners where two colors meet?

Here’s how to paint a corner where two colors meet in 6 easy steps:

  • Paint one wall.
  • Wait for the wall to dry.
  • Apply painter’s tape to the corner wall.
  • Repaint the corner wall.
  • Paint the other side of the wall.
  • Take off painter’s tape.

How do you paint a corner?

How To Paint Corners

  • Saturate the corner and stroke outward. Press the tip of the brush to the wall, shimmying it into the corner for full coverage.
  • Smooth and eliminate brushstrokes. Dip the brush, then run it over the short strokes in a long, perpendicular stroke to even out the coverage.

Do pro painters use tape?

Yes, Painters use tape regularly. Anytime we are protecting a surface from dust, paint splatter or over spray We use masking tape along with paper to mask areas.

How do painters get straight lines?

While it does take some setting up, painter’s tape is the most effective way for painters to create straight lines. Whether cutting in or making an isolated line, painter’s tape can create a straight line on almost any surface.

What is the fastest way to tape a room for painting?

To apply painter’s tape quickly and precisely, without any special tools, stick a few inches of tape to the molding and unroll about six more inches. While you hold the roll of tape tight against the wall, rotate it down to stick this section of tape and repeat the process.

Why is my paint bleeding through painters tape?

If the tape doesn’t adhere well, try a tape with a higher level of adhesion. Practice applying the tape until you can do it smoothly and with the correct amount of tension. Stretching the tape as you apply it can cause air bubbles or puckering, which lead to paint bleeding under the edge.

How do you paint a line without bleeding?


  • STEP 1 – PAINT YOUR BASE COAT. Before sticking on your painter’s tape, you need to paint your base coat color.


Painting along edges and corners of your walls and ceilings is not a difficult task, provided you have the best paint edger for the job.

Picking the ideal tool for your project won’t be a problem. We have already highlighted the pros and cons of each product, together with the buyer’s guide to help you make a clearer choice.

You want both of these tools because there’s nothing more noticeable than a lousy paint job. Choice what works best!