Best Automotive Hvlp Spray Gun

Last Updated on

Today I’m going to show you the best automotive HVLP spray guns to use for your spray jobs.

In fact, these are one of the most recommended HVLP spray guns for effective spray-painting.


I’ll also cover the most important tips you should know of when shopping for an HVLP spray gun.

Let’s get right into it…

HVLP which stands for high-volume, low-pressure is one of the latest technology being applied for an effective spray painting.

Spray guns with these specific properties give better and more consistent coverage than your everyday, conventional spray gun… and with minimal messy overspray.

Choosing the best automotive HVLP spray gun for your automobile will help give it the best finishes it deserves.

Best Automotive HVLP Spray Gun | Comparison Table

Are HVLP Spray Guns Good for Automotive Spray Painting?

best automotive hvlp spray gun

When it comes to automotive spray painting, air caps are regarded as the hierarchy of finish types… and in terms of transfer efficiency, HVLP air caps really stands out from the rest of its competing spray guns.

HVLP air guns have high volume low-pressure air caps which makes it use a lot of volume of air and converts it to low pressure. The benefit of this is a soft spray that tends to reduce overspray, which as well reduces coating waster and saves on paint costs.

Considering all these factors, you can best decide that: HVLP spray guns are the best to use for automotive spray painting.

The only drawback to HVLP spray guns is that the thick coatings are often not able to be atomized properly… but for lower viscosity coatings, HVLP is the best way to save on coating waste and at the same time, still get a high-quality finish.

That said, while every other spray guns we listed here are really strong and reliable, below are the 2 best automotive hvlp spray guns from the list.

Wagner Spraytech 0529031 Black MotoCoat Complete Car & Truck Paint Sprayer
  • AUTOMOTIVE CUSTOMIZING SPRAY GUN: Use the Moto Coat Complete Sprayer to apply low flashpoint coatings on your car exterior, truck bed, recreational vehicle, trailer and more
  • APPLIES PROTECTIVE AND DECORATIVE COATINGS: Applies everything from heavy truck bed coatings and undercoating to light materials such as rubberized peelable coating and auto finishing paints
  • TWO NOZZLES INCLUDED: The Detail Finish Nozzle applies a smooth, even coat on your automobile surface while the iSpray Nozzle can be used for a thicker, textured coat on truck beds and undercarriages
  • ADJUSTABLE SETTINGS CREATE IDEAL FINISH: Adjustability such as material volume flow, pattern direction and width allow for precise spraying on your vehicle
  • PORTABLE PAINT SPRAYER: The self-contained sprayer features a spark contained motor and 39 ft. hose, allowing you to safely and easily move around your project
Graco-Sharpe 288878 HVLP FX3000 Paint Spray Gun, 1.0 mm
  • 1.0 mm HVLP Gravity Feed Spray Gun
  • Lightweight and compact
  • Includes FX3000 gun, 600cc aluminum cup, wrench and cleaning brush

Last update on 2019-08-23 / Affiliate links / Images from Amazon Product Advertising API


Automotive HVLP Spray Gun Reviews

The right automotive HVLP spray gun can mean a big difference for your business or regular home projects.

In order to provide you with the best HVLP spray guns for your spray-painting, we dedicated a lot of time studying the market, conducted a lot of tests and discovered all you need to ensure an effective spray-painting.

Everything you need to decide on which automotive HVLP spray gun to buy for your spray-painting is in this simple guide.

1. Wagner 0529031 MotoCoat Complete Car & Truck Paint Sprayer, 39′ Hose


The Wagner 0529031 MotoCoat paint sprayer is one of the most recommended automotive HVLP spray guns for the following reasons…

It is a great tool for anyone who’d love to paint their car or truck without much hassle… and for a lesser cost than budgeted.

The Wagner 0529031 MotoCoat paint sprayer makes use of an advanced X-Boost turbine which is built to deliver high volumes of air through the hose up to the pistol where it is being propelled out through an innovative nozzle.

Thanks to this X-Boost built-in turbine, the Wagner 0529031 MotoCoat paint sprayer can cover up to an 8ft x

10ft surface in 1-5 minutes, while still delivering up to 8 gallons of material per hour.

The X-Boost turbine is perfect for spraying thick materials. This turbine has almost three times more power than other sprayers in the market.

The Wagner 0529031 MotoCoat paint sprayer also consists of two pistols…

  • One for liquid vinyl (thick materials)
  • The other for painting truck bed liners

These two pistols are screwed directly to the hose using a simple principle, making it a piece of cake to mount and assemble it.

This unit also has an iSpray nozzle that helps it spray protective materials to create a thick coat and textured finishes.

The iSpray nozzle is designed with wear parts that help to prolong its life. This nozzle also has the ability to be adjusted in order to spray vertical, horizontal, wide and narrow patterns.

The Wagner 0529031 MotoCoat paint sprayer has a hose length of 39 feet which is quite impressive in the sense that… most sprayers hoses come with hoses that are almost 15 feet shorter.

Finally, this device is built with a detail finish nozzle that offers a fine layer of thin coating which results in a smooth finishing touch after spray painting.

  • Attachments detach easily for quick clean up
  • Easy to use
  • Affordable
  • Long and flexible hose
  • Powerful X-Boost turbine
  • Excellent finishes
  • Small container
  • Needs to be cleaned regularly


2. Graco-Sharpe 288878 HVLP FX3000 Paint Spray Gun, 1.0 mm


From the well-reputed brand “Graco”, comes yet another HVLP spray gun specialized for automotive spray painting.

Luckily, the Graco-Sharpe 288878 HVLP FX3000 Paint sprayer has found its way to our list of “best automotive HVLP spray gun for spray painting”.

This model among Graco’s many spray guns is easier and more efficient to use for automotive spray painting.

In fact:

Its output can be compared to other high-end paint spray guns.

The Graco-Sharpe 288878 HVLP FX3000 Paint spray gun comes in different sizes, each built to suit various spray jobs. It comes with a paint cup lid which you can easily pull open to monitor your paint level in every job.

The spray gun is certainly capable of re-spraying a car.

It includes an FX3000 gun, 600cc aluminum cup, a wrench, and a cleaning brush for easy cleaning after every spray job.

The Graco-Sharpe 288878 HVLP FX3000 Paint sprayer is a 1.0 mm lightweight has been specifically designed for automotive spray painting.

  • Perfect for vehicles
  • Lightweight and compact
  • Available in various sizes
  • Easy to clean
  • Easy to use
  • No warranty
  • A small fan pattern
  • New tips are expensive
  • High maintenance cost


3. Tekna 703517 ProLite 1.3mm and 1.4mm Fluid Tip Spray Gun with TE20/HV30 Air Cap


In a way, climatic conditions can affect the way we do spray painting… and the Tekna 703517 ProLite HVLP Spray Gun is here to tackle that.

This is one of the best automotive HVLP spray gun to use in any climatic condition.

Packed as a solution with multiple components, this tool is excellent for solvent-based coatings and perfect for waterborne’s.

The Tekna 703517 ProLite HVLP Spray Gun comes uncupped with TE20 and HV30 air caps, and fluid tips of 1.3mm, 1.4mm, and 1.5mm.

Weighing only 2 pounds, this device makes for easy handling.

It comprises of a special DeKups adapter that allows for the use of DeKups disposable gun cups. These gun cups also make cleanup a simple and quick process.

With this tool, there is no need for a gun cleaning solution. The Tekna 703517 ProLite HVLP Spray Gun has a protective coating that helps to cover both its internal and external areas, giving the device a strong covering against corrosion.

Despite its high price, this tool is one of the best choices among its product line.

Its ability to be used in any type of climatic condition (varying from hot and humid to clean and dry) makes it exceptional.

  • Operates under any climatic condition
  • Perfect for both waterborne and solvent-based coatings
  • High transfer efficiency saves money on materials
  • Expensive
  • Doesn’t support latex paint


4. TCP Global Complete Professional 9 Piece HVLP Spray Gun Set with 2 Full Size Spray Guns


The versatile TCP Global Pro HVLP spray gun is specially engineered in a manner to ensure that all of its professional tasks and duties are met efficiently.

This spray gun is equipped with knobs that allow for easy adjusting of the spray pattern, as well as the fluid control and air pressure.

The TCP Global Professional HVLP spray gun is made up of a 2.5mm stainless steel needle and nozzle set which are great for spraying METAL FLAKES and other thickened materials.

With a standard inlet of 1/4 inches (a quarter inches) for air, the device allows air to circulate through freely.

This spray gun has a very powerful and strong operating pressure range of 29-50 PSI (2.0-3.5 bar) and air consumption of 3.5-7.1 CFM. It is also important to note that its air pressure requirements are compatible with varieties of portable air compressors.

The average air consumption of the gun is 6 CFM as the value can vary from 4.2 to 7.1 CFM (150-180 l/min)

Buying this spray gun, you get a good selection of 3-gun sets for high-performance spray-painting. These gun sets serve different purposes…

  • One for topcoat
  • Another for primer
  • …and finally the last for touch-ups

The gun also has a mini moisture filter, an air pressure regulator with a locking mechanism, stainless steel of

150cc, and an effective cleaning kit that includes 2 wrenches and filters, and a brush.

  • 1-year warranty
  • Easy to use
  • High efficiency and delivery rate
  • Full control of patterns, pressure and other features
  • The best option for beginners new to automotive HVLP spray guns
  • Very difficult to clean
  • Not favorable for left-handed users
  • Knobs may lose adjustment due to little vibrations
  • Consumes more paint than expected


5. Fuji 2203G Semi-PRO 2 – Gravity HVLP Spray System, Blue


The Fuji 2203G Semi PRO has also found its way to our list of the best automotive HVLP spray gun for spray painting.

Its versatile design optimizes for a better and more refined finish on everything from walls, floors, ceilings, floors, and exterior objects like benches, fences and many more…

The device is a professional non-bleed spray gun with an adjustable pattern fan control. The adjustable fan control system helps to adjust spray patterns to produce a more refined touch to your work.

It weighs about 26 pounds, and it doesn’t take much to assemble and disassemble.

The Fuji 2203G Semi PRO HVLP spray gun is built with a 1.3mm Air cap set and a 400cc Gravity Cup.

This 2-stage version of the Fuji spray can handle any time of coating and spray painting job.

It has a metal turbine case built alongside a handy gun holder and a 25ft hose with an air control valve that helps to reduce overspray and bounce back.

The device is powered by a 1400-watt motor.

  • Excellent finishes
  • Easy to assemble
  • Easy to clean
  • 2-year warranty
  • It’s somewhat expensive
  • Only available in a blue color


6. Campbell Hausfeld CHK005CCAV Gravity Feed Case Spray Gun Kit blue


Next up is a highly-praised spray gun from the Campbell Hausfeld stable… and it has been proven to be the best automotive HVLP spray gun to purchase under a low budget.

It is one of the ideal starter collection of tools for automotive spray painting.

The kit consists of two important spray guns that are built of quality materials and are capable of handling serious projects. Its spray guns are excellent for touch-ups and larger projects.

The touch-up spray gun has a 120ml cup while the larger gun has a 550ml cup, and on top of that, they both require pretty bearable CFM’s to operate.

The touch-up gun requires a 0.7CFM, while the larger gun requires a 2.1CFM… each operating at 40psi of pressure.

You should also note that the guns have the ability to adjust airflow in order to optimize its atomization and apply an excellent finish.

In conclusion, the Campbell Hausfeld CHK005CCAV Gravity Feed Case Spray Gun Kit comes with two gravity-feed spray guns, a cleaning kit, a metal file, air adjusting valves with gauges, in-line and regular paint filters, a coupler, a portable storage case, PTFE thread tape, and a wrench.

Indeed, this is the right kit to get you started on your automotive spray painting projects.

  • A complete 34-piece kit
  • Adjustable airflow
  • Portable storage case
  • Versatile
  • Different sized spray guns
  • Affordable
  • Very easy to use
  • Works with many air compressors
  • Not easy to remove items from the case
  • Hard to maintain
  • Not so easy to clean


7. DeVilbiss 802405 StartingLine HVLP Detail and Touch-Up Gravity Spray Gun


The DeVilbiss 802405 StartingLine HVLP spray gun is one of Devilbiss most recommended automotive HVLP spray guns for the following reasons…

It is one of the few affordable touch-up guns that provide quality finishes.

The device has an air consumption of 8CFM under standard ratings… and its 30 PSI inlet pressure delivers 10PSI of pressure at the air cap, which is sufficient for an efficient spray painting.

The DeVilbiss 802405 StartingLine HVLP spray gun comes with a 1.0mm fluid tip and an 8.5oz ME along with its mini size GVLP gravity field.

Its 1.0mm pin set-up is suitable for “on the go” and spot repairs with the application of a variety of coatings.

Despite its low price, the device still goes ahead to provide a one (1) year warranty for its users.

Worth every penny, this HVLP spray gun is also packed and sent along with a cleaning brush and maintenance wrench to ensure for effective maintenance.

  • Quite affordable
  • 1-year warranty
  • Nice finishes
  • Works well with latex and other water-based paints
  • Not so durable, but it’s very reliable


Choosing the Best Automotive HVLP Spray Gun | Ultimate Guide

Even as a novice spray painter, car painting still remains a very delicate job.

Basically, you should consider the following factors the next time you go shopping for an automotive HVLP spray gun:

1. Nozzle Size

A spray gun’s nozzle is usually the simplest part of the gun, as it is easy to place various nozzles on one spray gun.

The nozzle size of a spray gun totally depends on the type of automotive paint being used. The heavier the material being used, the larger the nozzle size needs to be.

…also, larger nozzle sizes are more ideal for primer, while smaller nozzle sizes are ideal for specialized paints like metallics, single-stage, pearl finishes, as well as clearcoats.

Primers require a nozzle size in the 1.8mm range, while for specialized paints, it requires a nozzle size in the 1.2mm range.

Although different nozzles can be bought separately for your automotive HVLP spray gun, it’s more useful if various nozzles are included alongside your purchased spray gun.

2. Feed Type

There are basically two feed types for HVLP spray guns: the conventional feed and the gravity feed.

The conventional feed type has its paint canister attached to the bottom of the gun, while the gravity feed type has its paint cup sitting on top of the gun.

N.B: Spray guns with conventional feed type are also regarded as siphon paint guns.

These spray guns are cheaper and carry more paint than the gravity feed type spray guns.

One disadvantage of siphon spray guns is that: they are not lightweight.

The gravity feed type uses less pressure than the conventional feed, therefore it requires less energy to draw fluids.

The gravity feed is the best and most efficient feed type for automotive spray painting.

3. Air Compressors

In shopping for the best automotive HVLP spray gun, it is important to consider the right air compressor that will keep up with the gun.

The larger the compressor being used for your spray job, the more efficient it will be.

Your air compressor must be able to consistently produce enough air in order to maintain the right pressure.

Spray guns are measured by a certain number of CFM (cubic feet per minute) and PSI (pounds per square inch) of pressure they require for operation… and these are the two specifications you should consider when choosing an air compressor for your HVLP spray gun; and vice versa!

The trick is to get a compressor that produces 1.5 times the CFM that the HVLP spray gun requires at a given pressure.


There you have it, a comprehensive guide to help you choose the best automotive HVLP spray gun for your spray job… and picking the right one depends on your budget.

Now I want to get your opinion on this…

Did I miss out on one of your favorite automotive HVLP spray guns?

Or maybe, you have questions that were left unanswered.

Either way, feel free to let me know by leaving a comment below right now.

Sharing is caring!